Réparez vos affaires Communauté Boutique

Verizon Ellipsis 10 Back Cover Replacement

Introduction

This guide is designed to provide you with simple steps to remove the back cover of the Verizon Ellipsis 10 to access the internal hardware.

Ce dont vous avez besoin

  1. Verizon Ellipsis 10 Back Cover Replacement, Back Cover: étape 1, image 1 de 1

    • Open the SD/SIM card cover to start prying off the back cover.

    Modifier

  2. Verizon Ellipsis 10 Back Cover Replacement: étape 2, image 1 de 1

    • Start using the iFixit Opening Tool in the SD/SIM area to release the clips holding the back panel on.

    Modifier

  4. Verizon Ellipsis 10 Back Cover Replacement: étape 3, image 1 de 1

    • Follow along the edge of the device to undo all of the retaining clips.

    Modifier

  5. Verizon Ellipsis 10 Back Cover Replacement: étape 4, image 1 de 1

    • Once all the clips are undone, the back panel should come off with little effort.

    Modifier
Conclusion

To reassemble your device, follow these instructions in reverse order.

2 autres ont terminé cette réparation.

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 2

7 derniers jours : 3

30 derniers jours : 8

Total : 354