Réparez vos affaires Communauté Boutique

Verizon Ellipsis 10 Speaker Replacement

Introduction

This guide is designed to provide you with simple steps to remove and replace the Verizon Ellipsis 10 Speaker. This replacement will resolve any sound quality issues.

Ce dont vous avez besoin

  1. Verizon Ellipsis 10 Speaker Replacement, Back Cover: étape 1, image 1 de 1

    • Open the SD/SIM card cover to start prying off the back cover.

    Modifier

  2. Verizon Ellipsis 10 Speaker Replacement: étape 2, image 1 de 1

    • Start using the iFixit Opening Tool in the SD/SIM area to release the clips holding the back panel on.

    Modifier

  3. Verizon Ellipsis 10 Speaker Replacement: étape 3, image 1 de 1

    • Follow along the edge of the device to undo all of the retaining clips.

    Modifier

  4. Verizon Ellipsis 10 Speaker Replacement: étape 4, image 1 de 1

    • Once all the clips are undone, the back panel should come off with little effort.

    Modifier

  6. Verizon Ellipsis 10 Speaker Replacement, Battery: étape 5, image 1 de 1

    • Remove the bottom piece of tape securing the battery making sure you are not peeling up anything else in the process.

    Modifier

  7. Verizon Ellipsis 10 Speaker Replacement: étape 6, image 1 de 1

    • Remove the top piece of tape using an iFixit opening tool.

    Modifier

  8. Verizon Ellipsis 10 Speaker Replacement: étape 7, image 1 de 1

    • Once you have a hold on the tape, carefully remove it making sure you aren’t damaging the battery in the process.

    Modifier

  9. Verizon Ellipsis 10 Speaker Replacement: étape 8, image 1 de 1

    • Unplug the battery power connector by sliding the white plastic plug down away from the board.

    Modifier

  10. Verizon Ellipsis 10 Speaker Replacement: étape 9, image 1 de 1

    • The battery should be free to come out of the device. Make sure not to bend or damage the battery.

    Modifier

  11. Verizon Ellipsis 10 Speaker Replacement, Speaker: étape 10, image 1 de 1

    • Using a Phillips #00 screwdriver, remove the four M1.5 screws from the right speaker.

    Modifier

  12. Verizon Ellipsis 10 Speaker Replacement: étape 11, image 1 de 1

    • Remove the black and white wires connected to the motherboard by pulling up on their connections.

    • Remove the three strips of tape.

    Modifier

  13. Verizon Ellipsis 10 Speaker Replacement: étape 12, image 1 de 1

    • Remove the four M1.5 screws on the left speaker.

    • Remove the speakers from the device.

    Modifier
Conclusion

To reassemble your device, follow these instructions in reverse order.

Auteur

avec 4 autres contributeurs

Mary Duran

Membre depuis le 04/03/19

597 Réputation

4 tutoriels rédigés

Badges: 12

+ 9 badges supplémentaires

Équipe

Oregon Institute of Technology, Team S2-G10, Lancaster Spring 2019 Membre de l'équipe Oregon Institute of Technology, Team S2-G10, Lancaster Spring 2019

OIT-LANCASTER-S19S2G10

4 membres

7 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 1

7 derniers jours : 1

30 derniers jours : 5

Total : 144