Introduction
Battery dead, or not holding a charge? Follow this guide to replace it with a new one! Note: This guide requires soldering.
Ce dont vous avez besoin
-
-
Gently push on the display from the front, near the camera. The circuit board and display will pop out through the back.
-
-
-
-
Using the plastic opening tool, gently pry the edges of the battery away from from the circuit board.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Annulation : je n'ai pas terminé ce tutoriel.
4 autres ont terminé cette réparation.