Aller au contenu principal

Ce dont vous avez besoin

Vidéo d'introduction

Cette vue éclatée n'est pas un tutoriel de réparation. Pour réparer votre iPhone 11 Pro Max, utilisez notre manuel de réparation.

  1. Vue éclatée de l'iPhone 11 Pro Max, Vue éclatée de l'iPhone 11 Pro Max: étape 1, image 1 de 3 Vue éclatée de l'iPhone 11 Pro Max, Vue éclatée de l'iPhone 11 Pro Max: étape 1, image 2 de 3 Vue éclatée de l'iPhone 11 Pro Max, Vue éclatée de l'iPhone 11 Pro Max: étape 1, image 3 de 3
    • De nombreuses rumeurs courent autour de ce téléphone, voilà ce de quoi nous pouvons être sûrs :

    • Système sur une puce (SoC) A13 Bionic avec Neural Engine de troisième génération

    • Écran OLED XDR Super Retina de 6,5 pouces (2688 sur 1242 pixels, 458 ppp) avec True Tone et HDR (pas de 3D Touch)

    • Triple caméra arrière de 12 MP (ultra-grand angle, grand angle et téléobjectif) et caméra selfie de 12 MP avec technologie TrueDepth FaceID

    • Stockage interne de 64 Go (256 Go et 512 Go en option)

    • LTE classe Gigabit, Wi-Fi 6, Bluetooth 5.0, NFC

    • Indice IP68

    -______________-

    jpariz2 - Réponse

    I know it what’s everybody has been talking about but the real ram specs of the new phones

    Denny Hane - Réponse

    It was disclosed at being 4 GB across all three phones on macrumors.com

    Dan -

    No Live stream?

    Tom Jackson - Réponse

    Whew! 4GB of RAM! Next thing you know they’ll be able to write to a 4GB microSD!

    melvin.schultz10 - Réponse

    You want a floppy disk drive and parallel printer port too?

    Alex Bowden -

  2. Vue éclatée de l'iPhone 11 Pro Max: étape 2, image 1 de 3 Vue éclatée de l'iPhone 11 Pro Max: étape 2, image 2 de 3 Vue éclatée de l'iPhone 11 Pro Max: étape 2, image 3 de 3
    • Avant de nous aventurer à l'intérieur, nous demandons un coup de main à nos amis de chez Creative Electrons. La magie des rayons X nous donnent une idée de ce qui nous attend.

    • Voilà en rang d'oignons de gauche à droite pour le plaisir des yeux les iPhone XR, XS Max et 11 Pro Max.

    • Voici les impressions de notre premier aperçu :

    • La batterie du 11 Pro Max semble avoir repris le design à cellule unique de l'iPhone XS, que nous trouvons donc pour la première fois dans un modèle Max.

    • Apple semble avoir allégé une fois de plus la carte mère, certainement pour faire place à l'imposante triple caméra.

    • Enfin, on dirait qu'une mystérieuse nouvelle carte se love sous la batterie.

    • Serait-elle liée à la recharge rapide bilatérale dont on a tellement parlé ?

    Blah blah blah. How much ram does it have???

    jack.frost_1 - Réponse

    Jack - The RAM has been disclosed as 4GB of RAM across all three phones a few days ago on macrumors.com

    Dan - Réponse

  3. Vue éclatée de l'iPhone 11 Pro Max: étape 3, image 1 de 3 Vue éclatée de l'iPhone 11 Pro Max: étape 3, image 2 de 3 Vue éclatée de l'iPhone 11 Pro Max: étape 3, image 3 de 3
    • L'iPhone de cette année s'est un peu étoffé dans la partie centrale et un peu beaucoup du côté des caméras.

    • Parler d'une "bosse" de la caméra n'est plus trop adapté… et si on disait "mesa" ?

    • Au moins, les rebords de ce plateau de la caméra de cet iPhone sont inclinés et se fondent un peu mieux avec la coque arrière.

    • Et surtout, ce téléphone resplendit dans la nouvelle couleur Apple: Vert Boba nuit.

    • Encore deux points notables avant de démonter le machin vert : le logo Apple est désormais centré sur la coque arrière et un nouveau numéro de modèle fait son apparition à l'intérieur du tiroir SIM, A2161.

    # apple logo position

    1. design ballance

    2. apple logo of wireless charging position

    lucas - Réponse

  4. Vue éclatée de l'iPhone 11 Pro Max: étape 4, image 1 de 3 Vue éclatée de l'iPhone 11 Pro Max: étape 4, image 2 de 3 Vue éclatée de l'iPhone 11 Pro Max: étape 4, image 3 de 3
    • L'iPhone est nouveau, mais la méthode d'ouverture est toujours la même : un petit tour de tournevis !

    • Nous décidons cette année de libérer les Pentalobes à l'aide du tournevis P2 à lame fixe de notre set Marlin spécial iPhone.

    • L'iSclack et un médiator finissent le travail et nous détachons soulever l'écran.

    • Bien qu'il s'agisse là de l'iPhone le plus étanche jamais conçu par Apple, l'adhésif qui fixe l'écran n'est pas plus coriace que les dernières années. De même pour nos vieilles amies, les vis Pentalobe.

    No adhesive seal/gule?

    10djl06f504.kaya - Réponse

    There’s a mistake in the German translation here due to the word choice. The ”twist” is literal if I am correct, so the German should read “mit einer Drehung” (with a turn), not “mit einer kleinen Neuerung” (with a small change).

    zunivolo - Réponse

  5. Vue éclatée de l'iPhone 11 Pro Max: étape 5, image 1 de 3 Vue éclatée de l'iPhone 11 Pro Max: étape 5, image 2 de 3 Vue éclatée de l'iPhone 11 Pro Max: étape 5, image 3 de 3
    • Il est temps de jeter un premier coup d'œil dans les entrailles de Professeur Maximus iPhone et la gargantuesque batterie en forme de L… Celle-ci a deux connecteurs de batterie, c'est du nouveau.

    • Il pourrait avoir de nombreuses raisons derrière cette nappe supplémentaire, la recharge bilatérale par exemple.

    • Quelques tests donnent les résultats suivants :

    • Le téléphone fonctionne quand la nappe côté port de recharge n'est pas connectée (en la reconnectant, nous sommes tombés sur un avertissement de température s'affiche temporairement).

    • Quand cette nappe inférieure est déconnectée, la recharge via le port Lightning marche, mais pas via la bobine de recharge sans fil.

    • Quand on déconnecte la nappe "principale" qui est directement reliée à la carte mère, le téléphone s'éteint et ne se rallume plus, même si l'autre nappe est connectée.

    no chance you guys could add a a non angled shot here? maybe you took one, but for some reason didn’t publish it?

    Suchir Kavi - Réponse

    If you are looking for something to use as a wallpaper, stay tuned!

    Arthur Shi -

    I mean, I actually just like using the shots for easy comparison across devices.

    Suchir Kavi - Réponse

  6. Vue éclatée de l'iPhone 11 Pro Max: étape 6, image 1 de 2 Vue éclatée de l'iPhone 11 Pro Max: étape 6, image 2 de 2
    • Les fabricants de smartphone misent plutôt gros sur la magie des logiciels pour améliorer la qualité des photos, il est donc étonnant qu'Apple se soit tellement investi dans le hardware des caméras cette année.

    • Le changement majeur est le nouveau objectif/capteur ultra-grand angle. Cependant, le module grand angle et le téléobjectif ont aussi été améliorés côté ISO et vitesse d'obturation.

    • Si vous voulez tous les détails, consultez l'analyse de Halide (en anglais).

    • La rangée des capteurs Face ID a aussi bénéficié de quelques modifications : la caméra frontale performe à présent à 12 MP (au lieu de 7) et les nappes ne sont plus coincées sous la batterie. La retirer n'a donc jamais été aussi rapide et facile !

  7. Vue éclatée de l'iPhone 11 Pro Max: étape 7, image 1 de 3 Vue éclatée de l'iPhone 11 Pro Max: étape 7, image 2 de 3 Vue éclatée de l'iPhone 11 Pro Max: étape 7, image 3 de 3
    • Les "yeux" en jettent ! Ils sont trois !

    • En creusant un peu plus, nous découvrons que les caméras sont nichées l'une à côté de l'autre, chacune avec sa propre nappe.

    • Les rayons X révèlent quelques surprises. Les barres foncées sont évidemment pour l'OIS, les petits points semblent correspondre aux composants de l'année dernière, mais il n'y a (probablement) pas de puces RAM ici.

    • N'imaginez surtout pas que nous allons en rester là ! Nous creuserons plus profond, alors restez à l'écoute !

  8. Vue éclatée de l'iPhone 11 Pro Max: étape 8, image 1 de 3 Vue éclatée de l'iPhone 11 Pro Max: étape 8, image 2 de 3 Vue éclatée de l'iPhone 11 Pro Max: étape 8, image 3 de 3
    • Le set Marlin est toujours à nos côtés et nous aide à venir à bout des dernières vis à écartement qui fixent la carte mère carrée familière.

    • Elle semble avoir rétréci au lavage par rapport à celle de l'iPhone XS, elle est vraiment dense à présent !

    • Vous voyez double ? Pas de soucis, nous aussi ! La carte de l'iPhone 11 Pro Max et celle de l'iPhone 11 Pro se ressemblent comme deux gouttes d'eau.

    • Pourrait-il s'agir de la même carte mère ? Nous vous tenons au courant…

    So both board numbers are 820-01682-08? now thats strange!

    Jay - Réponse

    Rewa ha confirmado que son las mismas!! Solo cambia una resistencia debajo del procesador, quitando esa resistencia puedes conectar la pantalla del 11 pro Max al 11 pro, restauras y funciona correctamente!!

    En el vídeo se ve claramente https://youtu.be/OnSIVtVhX_0

    David Simón López - Réponse

  9. Vue éclatée de l'iPhone 11 Pro Max: étape 9, image 1 de 3 Vue éclatée de l'iPhone 11 Pro Max: étape 9, image 2 de 3 Vue éclatée de l'iPhone 11 Pro Max: étape 9, image 3 de 3
    • Nouvelle forme, même design double couche et même procédure de séparation.

    • Une tonne de chaleur concentrée et un petit effet de levier, et voilà que la carte supérieure se décolle de la carte d'interconnexion.

    • Nous glissons un regard sur le fameux processeur A13 et une tonne de morceaux de silicium étalés sur les fines cartes.

    What’s with all the metal dots around the edge? Is there graphite sheet material on the opposite side of the Top board where A13 is? Seems A13 chip is pointing inward to the air cavity of the thin box shape. Bottom side has graphite across entire of surface. Is there a way it transfers heat from the rectangle on the top side for the first photo. Presume the casing of the logic board may double as heat transfer too?

    Tom Tubbs - Réponse

    Probably how the top board communicates with the bottom, the dots being conductive pads. These touch conductors in the middle separator and lets the current travel through to the bottom.

    paul -

    Crazy how compact the board is! Next apple will remove the SIM card

    Paul Richard - Réponse

    The metal dots are the filled/plated over vias that connect the logic board and RF board through the thick interposer between them.

    Karl - Réponse

    What are the packages marked with circle/triangle/rectangle markings?

    Tony Yang - Réponse

  10. Vue éclatée de l'iPhone 11 Pro Max: étape 10, image 1 de 2 Vue éclatée de l'iPhone 11 Pro Max: étape 10, image 2 de 2
    • Nous avons mis nos meilleurs détecteurs de puces à la besogne. Voilà celles que nous avons pu identifier :

    • Système sur une puce (SoC) A13 Bionic APL1W85 Apple posé sur LPDDR4X H9HKNNNCRMMVDR-NEH SK Hynix (sûrement de 4 Go, mais il faudrait que SK Hynix mette à jour son décodeur)

    • CI de gestion d'alimentation 343S00355 APL1092 Apple

    • Codec audio APL1092 Cirrus Logic

    • Paquet USI non identifié. EDIT :' Il s'avère que c'est ici que se loge la nouvelle puce U1 Ultra Wideband d'Apple. Plus d'infos sur notre blog.

    • PAMiD moyenne/haute bande 8100 Avago

    • PAMiD basse bande 78221-17 Skyworks

    • CI de gestion d'alimentation STB601A0N STMicrolectronics

    H9HKNNNCRMMVDR-NEH, leggendo lo schema di SK Hynix, è un LPDDR4X, non una LPDDR4.

    Velocità DDR4 da 4266 Mbps!

    Gioser - Réponse

  11. Vue éclatée de l'iPhone 11 Pro Max: étape 11, image 1 de 3 Vue éclatée de l'iPhone 11 Pro Max: étape 11, image 2 de 3 Vue éclatée de l'iPhone 11 Pro Max: étape 11, image 3 de 3
    • Il y a tellement de puces que nous avons pas pu les nommer toutes en une fois. Voilà donc la carte RF :

    • Système sur une puce (SoC) WiFi/Bluetooth 339S00648 Apple/USI

    • Modem X927YD2Q Intel

    • Émetteur-récepteur 5765 P10 A15 08B13 H1925 Intel

    • PAM 78223-17 Skyworks

    • Suivi d'enveloppe 81013 - Qorvo

    • DRx 13797-19 Skyworks

    • CI de gestion d'alimentation baseband 6840 P10 409 H1924 Intel

    What is the big silver thing in the top right corner?

    Robert Stein - Réponse

    The SIM reader!

    Sam Goldheart -

    No wonder they keep making them smaller! That’s a lot of real estate.

    Robert Stein - Réponse

    Is the wifi chip still Broadcom in Apple SoC?

    gwiyeomlin - Réponse

    No eSIM chip ?!

    Noko - Réponse

    it is ST33G1M2 from STMicroelectronics. On the PCB board, it is next to intel PMIC.

    JJ Wu -

    “Intel X927YD2Q modem”

    Apple X927YD2Q modem surely?

    Alex Bowden - Réponse

    Does anybody know what SKY78223-17 is?

    Zhiguo Lai - Réponse

    Software reverse engineer here: I can confirm that the X927YD2Q chip is a Intel XMM7660 (it’s ARM again after the XS was x86).

    Brinly T - Réponse

    Is this responsible for tracking 81013 - Qorvo Envelope Tracking?

    Omeke - Réponse

    Can this be reassembled and work correctly after its pulled apart?

    Jason Kay - Réponse

  12. Vue éclatée de l'iPhone 11 Pro Max: étape 12, image 1 de 3 Vue éclatée de l'iPhone 11 Pro Max: étape 12, image 2 de 3 Vue éclatée de l'iPhone 11 Pro Max: étape 12, image 3 de 3
    • Enfin, voilà notre récolte sur la face supérieure :

    • Stockage flash de 64 Go TSB 4226VE9461CHNA1 1927 Toshiba

    • YY NEC 9M9 (probablement l’accéléromètre/gyroscope)

    • En plus de toutes ces puces, nous épluchons plusieurs couches de matériau pour transfert thermique à base de graphite, qui recouvrent la carte RF.

    • Apple affirme avoir amélioré le transfert thermique, ce qui fait de ces iPhone Pro les plus performants à long terme : la chaleur émanant de la carte mère est dissipée à travers plusieurs couches de graphite jusqu'à la coque arrière.

    • Ce n'est peut être pas aussi cool que les systèmes de refroidissement à base de liquide, que nous avons trouvés dans des téléphones Android, mais cela devrait suffire pour gérer les super performances de la puce A13 sans interférer avec les signaux émis par la carte RF.

    Inaccurately demolished capacitors and shifted the chip

    Иван Батищев - Réponse

  13. Vue éclatée de l'iPhone 11 Pro Max: étape 13, image 1 de 3 Vue éclatée de l'iPhone 11 Pro Max: étape 13, image 2 de 3 Vue éclatée de l'iPhone 11 Pro Max: étape 13, image 3 de 3
    • Nous tournons vers la batterie et sommes ravis de découvrir quelques (petites) aides à la réparation.

    • Le seul truc qui nous gêne est le Taptic Engine. Une fois que nous nous en sommes débarrassés, nous trouvons des bandes adhésives étirables d'extraction extra larges (et solides !).

    • Cette procédure plutôt simple tient plus de l'iPhone 6 que de certains téléphones plus récents.

    • Un petit coup sur les bandes adhésives et la batterie se détache de l'iPhone.

  14. Vue éclatée de l'iPhone 11 Pro Max: étape 14, image 1 de 3 Vue éclatée de l'iPhone 11 Pro Max: étape 14, image 2 de 3 Vue éclatée de l'iPhone 11 Pro Max: étape 14, image 3 de 3
    • On dirait qu'Apple aime mettre le paquet cette année. La centrale de l'iPhone 11 Pro Max pompe 3969  mAh à 3,79 V, pour un total de 15,04 Wh. Cela fait 2,96 Wh de plus par rapport à la batterie du XS Max, et 1,53 Wh en moins par rapport à celle du Galaxy Note 10+ 5G.

    • D'où vient toute cette puissance ? 4,6 mm d'épaisseur, 23,8 cm³ de volume et 59,6 g sur la balance. La batterie a donc gagné 0,7 mm, 4,2 cm³ et 13 g, en comparaison avec celle du XS Max.

    • Nous soupçonnions Apple d'attribuer les 5 heures (!) de gain en autonomie seulement à la nouvelle puce A13 et au module de gestion d'alimentation. En fait, il suffit d'épaissir votre téléphone pour gagner un max en autonomie. Qui l'eût cru ?

    • L'iPhone XS de l'année dernière avait aussi une cellule en forme de L, ce qui nous avait permis de nous pencher sur la complexité des coins intérieurs et de l'expansion thermique dans le contexte de la conception des batteries.

    I’m so proud of you apple, I knew you could do it

    Andy Miller - Réponse

  15. Vue éclatée de l'iPhone 11 Pro Max: étape 15, image 1 de 3 Vue éclatée de l'iPhone 11 Pro Max: étape 15, image 2 de 3 Vue éclatée de l'iPhone 11 Pro Max: étape 15, image 3 de 3
    • La carte mystérieuse que nous avions entraperçue aux rayons X en-dessous de la batterie relie la batterie, la bobine de recharge sans fil et le Taptic Engine.

    • Voici donc le premier second connecteur de batterie jamais trouvé dans un iPhone. Il se connecte juste à côté de la bobine de recharge sans fil. Nous nous demandons pourquoi Apple l'a mis là.

    • L'entreprise à la pomme vient de publier une nouvelle documentation, expliquant que l'iPhone 11 Pro est équipé d'un nouveau hardware afin de contrôler et gérer les performances de la batterie. Il s'agit peut-être de cela, mais cela ressemble étrangement à du matériel pour recharge bilatéral.

    • Nous détachons un composant qui s'avère être un baromètre entièrement reconçu et incluant un joint torique étanche.

    • Tous les composants de ce côté du téléphone sont collés au châssis avec un adhésif qui semble un peu plus visqueux et collant que dans nos souvenirs de l'année dernière. Cela est sûrement en rapport avec l'étanchéité améliorée.

    On picture 2, is that white square next to the being disconnected thing a LCI (Liquid contact indicator) or white mesh or something?

    Dvy - Réponse

  16. Vue éclatée de l'iPhone 11 Pro Max: étape 16, image 1 de 2 Vue éclatée de l'iPhone 11 Pro Max: étape 16, image 2 de 2
    • Décoquillons cette mystérieuse carte d'interconnexion et voyons un peu les puces à l'intérieur :

    • STPMB0 929AGK HQHQ96 153915 STMicroelectronics

    • Amplificateurs audio 338S00411 Apple

    • TI 97A8R78 SN261140 A0N0T

    Looks like you used too much heat in opening ;-{

    There are quite a few chips that got shifted. Can you move them back and give us another pic?

    Dan - Réponse

    Are those amplifiers still based on Cirrus Logic designs? They seem to have a very similar model number to older Cirrus/Apple amplifiers. Why do they still have Cirrus audio codecs but use the Apple branding on the Cirrus parts? Are they trying to push out Cirrus Logic?

    djlobb01 - Réponse

    That looks like the actual battery charging circuitry, on it’s own tiny daughter board. I don’t see any batt charging circuitry (Hydra? Tigris?) on the main logic board.

    Spector NS5 RD - Réponse

  17. Vue éclatée de l'iPhone 11 Pro Max: étape 17, image 1 de 3 Vue éclatée de l'iPhone 11 Pro Max: étape 17, image 2 de 3 Vue éclatée de l'iPhone 11 Pro Max: étape 17, image 3 de 3
    • Il n'y avait absolument rien à redire au sujet de l'écran du XS Max (à part son prix salé). Nous ne sommes donc que peu surpris par la grande ressemblance de l'écran "XDR" de cette année.

    • Cependant, l'écran "XDR" ne dispose pas de service à 999 $, donc il est pratiquement inutile.

    • Amélioration mineure mais utile : les trois nappes sont proches l'une de l'autre. Cela réduit le risque d'en abîmer une quand on tranche les bords du téléphone pour l'ouvrir.

    • Nous pensions que la perte de la 3D Touch se ferait sentir un peu plus. L'écran a juste perdu un quart de millimètre d'épaisseur, c'est tout… Le léger embonpoint de l'iPhone est donc largement dû à l'augmentation des capacités de la batterie.

    • Une dernière puce se cache sous une plaque de protection : Samsung S2D0S23, la puce gérant l'alimentation de l'écran.

  18. Vue éclatée de l'iPhone 11 Pro Max: étape 18, image 1 de 2 Vue éclatée de l'iPhone 11 Pro Max: étape 18, image 2 de 2
    • L'ensemble connecteur Lightning et la nouvelle carte d'interconnexion se détachent d'un bloc. Il nous faut un peu batailler contre un vicieux mélange de vis et de colle, allez-y donc de pied ferme si une de ces pièces tombe en panne !

    • Un dernier coup de pincette vient à bout d'une seconde puce RAM insaisissable. Nous cueillons ensuite les caméras. Rien de neuf à part quelques capteurs brillants et sans plaque de protecti… euh minute, c'est quoi ça ??

    • Rien. Cette puce AD5844CDA0 est sûrement un stabilisateur d'image (et un farfadet quelconque).

    So what are the sensor details for each camera?

    stevemhood - Réponse

    Is this USB 3.0 standard this year?

    gk29 - Réponse

    AD5844 is most likely 10-bit VCM Driver from Analog Devices. Perhaps similar to AD5823.

    andy - Réponse

    Still using SONY sensor? or omnivision ?

    zxttgg - Réponse

    can you at least measure the camera sensor size? tks.

    duy0699cat - Réponse

    Batery muubile batery chearcher

    Maxamed Xuseen - Réponse

  19. Vue éclatée de l'iPhone 11 Pro Max: étape 19, image 1 de 3 Vue éclatée de l'iPhone 11 Pro Max: étape 19, image 2 de 3 Vue éclatée de l'iPhone 11 Pro Max: étape 19, image 3 de 3
    • Nous dénichons trois pavés thermiques supplémentaires qui tapissent la coque arrière. Cependant…

    • Les rayons X révèlent que chaque pavé est posé sur une encoche dans le revêtement de la coque en acier. À notre avis, c'est sûrement pour laisser passer les signaux RF.

    • De plus, chaque pavé est connecté par une nappe à un faisceau complexe d'antennes.

    • Nous n'en sommes pas sûrs et certains, mais nous voilà peut-être bien face à notre premier module Ultra Wideband.

    In Apple’s doc for case design, etc., the technical drawings in the those regions are marked and called out “DO NOT OBSTRUCT THIS AREA WITH METAL OR OTHER CONDUCTIVE MATERIAL”, and the one closest to the top of the phone adds “ (FULL PRODUCT VOLUME)”

    David Crook - Réponse

    where is the antennae bus. i don’t know what one looks like and i need to know to apply my r2l device to my phone. thanks!

    Yoo Hoo - Réponse

  20. Vue éclatée de l'iPhone 11 Pro Max: étape 20, image 1 de 1
    • Ce démontage est officiellement fini et voilà ce que nous avons trouvé !

    • Le téléphone s'est épaissi de 0,4 mm et l'écran a maigri de 0,25 mm suite au départ de 3D Touch.

    • Les deux nappes de la batterie sont peut-être en lien avec la recharge bilatérale apparemment supprimée par Apple, à moins qu'elles ne servent juste à gérer l'autonomie de la batterie.

    • Les 4 Go de RAM ne sont pas encore dans le marbre, vu que nous n'avons pas pu identifier de RAM spécifique à la caméra.

    • Plus quelques antennes RF (nous en sommes quasiment sûrs), tout ce qu'il faut pour jouer à cache-cache avec la puce U1.

    • Ne raccrochez pas, nous allons bientôt revenir avec d'autres vues éclatées !

    I only want to suggest you to type 0.4 mm and 0.25 mm instead of “.4 mm” and “.25 mm” to improve readability

    David - Réponse

    I agree - misread that as total 6.5mm for some reason (can a phone have a negative thickness..??)

    Andy Liggins -

  21. Dernières pensées
    • La réparation cruciale de l'écran et de la batterie sont prioritaires dans la conception de l'iPhone.
    • La procédure de la batterie a été simplifiée et il est possible d'accéder individuellement à beaucoup de composants.
    • Nous préférons l'usage généreux de vis à la colle. Cependant, vous allez devoir vous armer de vos tournevis spécifiques Apple (Pentalobe, Tri-point et Torx) en plus du bon vieux cruciforme.
    • Les mesures d'étanchéité compliquent quelques réparations, mais réduisent le risque de dégâts des eaux.
    • Les vitres à l'avant et à l'arrière doublent le risque de casse. De plus, si la coque arrière se casse, vous devrez retirer chaque composant et remplacer tout le châssis.
    Indice de réparabilité
    6
    Indice de réparabilité de 6 sur 10
    (10 étant le plus facile à réparer)

Merci à ces traducteurs :

en fr

91%

Ces traducteurs nous aident réparer le monde ! Vous voulez contribuer ?
Commencez à traduire ›

Taylor Dixon

Membre depuis le 06/26/18

66 782 Réputation

94 tutoriels rédigés

78 commentaires

It would be great if you could determine the sensor used in each of the camera modules.

stephenhood_99 - Réponse

2nd this request! Thanks

Peter Pham -

would love to see a straight on shot of the phone with the screen off. (without any angles) Would also like to a teardown of the 11 Pro, which is likely more impressive density wise. I also hope you'll continue to pray open their stacked boards.

Suchir Kavi - Réponse

also, display assembly thickness comparisons against the XS. With 3D Touch gone, that could be very interesting.

Suchir Kavi - Réponse

Why would you not do this sooner as there are plenty of them out there in the hands of media? The whole point is we’re jonesing for info WHILE we wait for Friday to get here which is when a lot of will have one in our hot hands.

jamesayres2374 - Réponse

IIRC, they did a tear down way earlier than Apple wanted them to, and lost early access to all future iPhones. It’s not that they don’t WANT to do it, they just HAVE to wait to get it like everyone else.

smoker68x -

“In September 2015, Apple removed the iFixit app from the App Store in reaction to the company's publication of a teardown of a developer pre-release version of the Apple TV(4th generation) obtained under Apple's Developer Program violating a signed Non-Disclosure Agreement and as such their developer account was suspended.”

smoker68x -

also, the media units have to be returned once the official units get released, so ifixit wouldn’t be able to return it after it had been torn down

James Wride -

iFixit is not offered pre-release hardware. And besides the reviewers are not allowed to open the gear to peek inside.

Also keep in mind Apple has pox’ed them as they are fighting for the Right to Repair which Apple is against.

Dan -

Would love to know if the rumored bilateral charging hardware is in there, even though they didn't turn it on.

Christopher Stroud - Réponse

These guys seem to be first. I don’t understand the language in the video but the pictures seem to show a similar battery to the XS and an overall similar design. https://www.youtube.com/watch?v=8-0v6rWw...

Larry - Réponse

wow, that board is absurdly small. They're just an integrated modem, and an eSIM away from getting it even smaller.

Suchir Kavi -

would be good to see the OLED IC

nik.macri - Réponse

What do you mean? The screen is the OLED display no IC

Dan -

I would like to see if that annoying camera bump is any larger than the XS

Henry Phillips - Réponse

Please confirm 4GB or 6GB to see if they set 2GB aside for the camera ISP only.

Also reverse wireless charging that didn’t make it in the final product as per rumors, can you confirm what hardware is present (if any).

joedan76 - Réponse

The RAM was disclosed on macrumors.com a few days ago, all three phones have 4 GB

Dan -

Hi Guy’s - Can we get a breakdown of the antennas within the case as well as were are and which bands that support.

Dan - Réponse

We can’t even get a confirmation on the ram yet?? They’ve had the phone since early morning. Ammmaaaazzzzziiiinnnggg. Are we in 2019? What’s going on here

jack.frost_1 - Réponse

Jack It’s still 4 GB ;-}

Dan -

It is going to be 4GB. Even the new Pixel is rumored to be 4GB and Android is a larger RAM eater in contrast to iOS.

RAM is almost entirely a spec sheet war thing on these phones. No one is ever going to use 12GB or even 8GB on a (current) Android phone outside of a benchmark.

Power saving will close background apps before RAM could even dream of filling up. My current OnePlus has 8GB and the average usage is 3.2GB and I’m a fairly heavy user. The majority of this is also going to the OS/Google Services.

Phones aren’t desktops. Please don’t pay for (or demand) excessive amounts of RAM and encourage waste.

Travis Hensley -

I don't see it that way.

i have here an iPad device with 2gb ram, i have been doing the same things for years, the same apps.

but due to new functions and bigger websites, the apps load much faster in multitasking.

there are enough videos where clearly shows that e.g. the iPhone XS Max (4GB) loses against devices with 8 gb or 12 GB ram over and over again. because the gapps have to be reloaded.

koeifme€ -

Wut? That makes no sense. If you're talking about vs 8 and 12GB devices then you're talking about iOS vs Android which negates any assumptions about hardware. Thread management and thread eviction is completely different between the two OS'

Plus end of day, here in the real world, iOS feels consistently real world faster regardless. I use both an XS Max and a Note 10+ and as always, the Samsung device feels consistently less snappy. Benchmarks only matter for spec warriors who exclusively use their device to read and watch phone benchmarks. It's like bench racers in cars who can barely even drive.

Endless objective reports have been done showing that RAM on iOS barely matters based on *the range of RAM options available for iOS*, which is the only sound comparison. The best example is the 4GB vs 6GB iPad Pro.

Feel free to stay wrong and keep proving lack of experience by arguing an obvious point. I'm out.

quantmflux -

I don't see it that way. I have an S10 and XS Max.

The XS Max throttles much faster and the battery is bad at games app. iOS in general is also very limited.

You always need more RAM and as you can see Android has much more functions than iOS. Android has many similar functions as a desktop system. and is independent without Apple server activation.

your iPhones or iPads are central products. without apple server you can't activate the devices.

otto3dmek -

Is there a possibility to charger both cable and wireless simultaneously !?

Rene - Réponse

I did this on my xs and it seemed to work but did not leave it like that for more than a minute as I didn’t want to potentially damage it. not saying it will but I don’t want to risk it.

Nerd World Vlogs -

No it's not possible. It will automatically pick the source the provides the most power.

Dean Lubaki -

Were you able to confirm who made the camera sensors and the product number?

stevemhood - Réponse

Is wireless charging speed still at 7.5w?

wress89 - Réponse

Yep.

In April this year Apple cancels his own gadget announced two years ago: AirCharger

I think it could give more power than others assigned by Apple.

Rene -

Only result for SK Hynix H9HKNNNCRMMVDR-NEH seems to be ifixit itself…Alas, RAM debate not yet put to rest!

tipoo - Réponse

The proper way is to look at it from the software (one of the reviewers had already done this) not depend on the chip markings (as iFixit pointed out they needed to glean the code a bit as the decode sheet has not been updated by SK Hynix). Otherwise you really need to look directly at the chip microscopically counting off the storage cells to be sure. That takes time as you need to carefully grid the potting material off so you can visibly see the layers.

4 GB is quite a lot of RAM for a phone! Mobile devices are a balance, going to much is just as bad as going too light! In addition you can’t compare across different architectures.

As we’ve seen Apple’s design efforts in the past, they just don’t need as much RAM or faster running CPU’s as other phones, yet get much more performance!

Dan -

that's not true. in reality speed test clearly shows it.

more ram are significantly better. for multitasking, games app and future system updates (if more features are added).

if you don't know yet, RAM is one of the fastest memories in the device. there is not a single technical reason not to install it anymore.

apple knows about this technique and intentionally use so little RAM. so that in the future, users will notice why many games apps need to be reloaded.

koeifme€ -

I'll follow you around and keep telling you you're clueless since you want to keep making this invalid point. Please spend more time actually learning and less time voraciously consuming and misinterpreting benchmarks. Especially the ones with broken methodologies.

“MAWR RAMZ IS BETTAR!” has *never* been an absolute truth, but becomes totally specious comparing *between platforms*. At least try to actually learn how thread management works and how it differs between iOS and Android. Actually learn it, maybe even try a hand at coding, and then revisit your poorly formed opinion. Or just now pretend you're already “a dev" and already know, even though you're clearly not and dont.

quantmflux -

Everyone knows the lies of apple.

back then apple said 1 GB RAM would be enough for iPhone 6. everyone who uses the device today knows exactly how slow safari and other apps run. because the apps today are more functional and larger.

example the iPad mini 4 has the same A8 SoC as iPhone 6 or 6 Plus. but doesn't get iOS 13.

it's just a fact that the operating system has to do more and more and the RAM is the most important today. CPU/GPU or internal hard drive are now so fast. that there are hardly any improvements left for the daily apps.

but when new multitasking tasks, background tasks and new features are added for the third party app developers, there is a big difference.

otto3dmek -

as you can currently see iOS 13 add many functions of Android.

background tasks, download manager, File Explorer, Widget on homescreen (iPadOS) etc.

nevertheless all these new functions do not run as smoothly as under Android or are very poorly implemented.

anyone who has ever used file explorer, custom keyboard, Widget under iOS 10, iOS 11, iOS 12 and iOS 13 knows it. very buggy and few features.

Android is much better because they have been using it for years and have constantly optimized it. due to the great support of the android community, many android apps have become much prettier and faster. the iOS community, on the other hand, does almost nothing at all. their own fault.

 everyone who goes into the app store and doesn't just want to make games or messenger apps. knows exactly how many apps from independent developers are barely available anymore. many apps haven't been updated for years or aren't available at all in the app store anymore. most of them are still with lots of ads, trackers and slow.

otto3dmek -

What’s the capacity of that DRAM?

Gary Watson - Réponse

It is 4GB.

H9HKNNNCRMMVDR-NEH is:

LPDDR4X

Voltage: 1.1V / 0.6V

Size: 32Gigabit (4GB)

Speed: 4266Mbps

Lead and Halogen Free

Spec sheet is available here: https://www.skhynix.com/static/filedata/...

Phil Rosenthal - Réponse

Great work ! very sad to see sucky intel modems again. I live in an area of marginal signal so was really hoping the new phones would have Qualcomm 4G modems considering apple paid out all that cash.

i guess I’ll hang on until next year - 5G Qualcomm modems, 12.8 billion transistor 5nm A14 with 8 CPU cores, and 6 GPU cores, extra 2GB memory sure this time ?

Dan G - Réponse

While a lot of folks would love to see a Qualcomm modem as the previous generation of the Intel modem was a bit lackluster. We will need to see if this generation is better once it’s tested. I’m sure Intel was working hard trying to improve the design. So lets wait until the testing gets done before we cry.

Do keep in mind the Intel model used before was not that bad! Sure it was on the slow side but it wasn’t the worst either. Most people won’t need the few kbit difference between them.

Dan -

What is with USB 3.0 speed support? Why do so many people keep forgetting that?

there has never been an iPhone that supports USB 3.0 speed. No problems with Android devices like Samsung Galaxy S10, S9, S8.

koeifme€ -

Superbe ! Merci

[deleted] - Réponse

Desoldering that little board didn’t bode too well for those resistors/capacitors huh…

Daniel Pierce - Réponse

Will you provide an image with just the screen removed to use as a background, it is my favorite part of these tear downs

Chris Glenski - Réponse

We will! Stay tuned for wallpapers!

Arthur Shi -

Love the new camera on iPhone Pro! I always satisfy with the design hardware inside of Apple.

Kimi

Kimi - Réponse

Very disappointed that you didn't post the details for the camera sensors after you clearly took them apart.

stevemhood - Réponse

How do you know that you can’t separate the back glass from this iPhone? You didn’t try.

Dinan Blueje - Réponse

Are you doing iPhone 11 and 11 pro teardown as well?

Chris Meyer - Réponse

You can find wallpapers here!

Arthur Shi -

iPhone 11 has USB 3.0 support?

Because my iPhone X or XS Max only supports USB 2.0 Speed. My friend with Samsung Galaxy S9 and Note 10+ has USB 3.0 (USB 3.1 first generation) speed.

koeifme€ - Réponse

Nice work gang. Re: Improved battery monitoring, can you confirm if Apple ditched the Dialog power IC and made their own as was rumored?

tipoo - Réponse

too bad.. they already bought the Dialog PIMIC division last yr.

sanju115 -

Excellent travail. je salue aussi la célérité dont vous avez fait preuve en offrant cette vue éclatée vu que l’iphone est sorti il y a seulement quelques jours.

Elias GUIVI - Réponse

Thank you so much for the teardown. Do you have any plans to disassemble the coil as well? Would love to see the actual coil instead of the X-Rays!

crisssy724@gmail.com - Réponse

Where are the high res pictures that we can use for our wallpaper?

I really enjoy using them as my wallpaper because on my lock screen, I have the X-ray picture to show about where the charging coils are to make it easier to place my phone on the charger

Plus its a nice conversation starter when people look at my phone

Curt - Réponse

You can find wallpapers here! Hope you enjoy them!

Arthur Shi -

What is the Wi-Fi chipset? Broadcom or Qualcomm perhaps?

Jiri Brejcha - Réponse

I would also like to know this! the new 802.11ax (Wi-Fi 6) implementation should be interesting.

Ewout -

excellent job! thank you all guys!

Ren Draco - Réponse

после вашей разборки уровень ремонтопригодности 1 из 10. как так можно распаивать плату??? просто ужас. криворукие мастера

alexwilsonads - Réponse

Really love it watch this tear down .Thanks for your valuable work

tamilcdm - Réponse

Could you measure the die size (die area) of the Apple A13 Bionic?

Ewout - Réponse

where is the NFC ?

Marco Merlin - Réponse

iPhone 11 Pro Max has no USB 3.0 support! Samsung Galaxy S8, S9, S10 or the Huawei devices (e.g. P30 Pro, Mate 20 Pro) have USB 3.0 (3.1 first generation) support.

You have to imagine an iPhone 11 Pro Max (512 GB) you can only transfer the data (iTunes backups, photos, videos, games apps) from the PC with USB 2.0 Speed.

In this case the iPhone 11 Pro Max would need at least 4x as long as the Android devices.

otto3dmek - Réponse

Were you guys able to put it back together?

rjv - Réponse

Please analyze the metal content of the camera housing, thank you. Is it statinless steel, aluminum, plastic, zirconium-based amorphous metals? Do you have a mass spectrometer handy?

morgenabend - Réponse

Is it just me, or do the three rear cameras look like a bowling ball finger holes?

Ethan Zuo - Réponse

The beauty of the device from the inside no less the beauty of the outside .. something amazing

Saleh Alknani - Réponse

[粤ICP备19036977号 ]

Wow, that’s awesome

qifeidong - Réponse

Hi is there anyway to clear the non-genuine parts error message after the battery replacement?

Vincent Lim - Réponse

Hey Vincent! Unfortunately there is not a way to clear the non-genuine parts error message after a battery or screen replacement unless you (or whoever does the repair) are an Apple authorized service provider. You can read more about the non-genuine parts messages in these two articles: batteries; displays.

Taylor Dixon -

Can y’all pull off that Toshiba flash chip? Is it the same footprint/layout as earlier versions?

Paul Rixon - Réponse

excelente aporte colegas, saludos buen día.

David Molina - Réponse

I notice the connectors, a lot of of connectors. it’s very small and very very thin. What is the brand of thoses connectors ?

Folace - Réponse

the phone can start without the screen?

have a iphone 11 pro max with the screen brocken, left some moths without turn on, and now i tried and no power, itunes dont recognize, is like the battery died? some idea ?

thanks !

Miguel Andres Correa Montoya - Réponse

the way they split that board lol

bennyshovelar - Réponse

Do you guys not carry the loudspeaker for this model? I didn’t see it in the parts section on the website? I need to order one to replace it on a customers device, so are you out of stock or do u jus not carry it? And or can you point me In the right direction with a link to where I can order one?

Ronald King - Réponse

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 57

7 derniers jours : 348

30 derniers jours : 1,493

Total : 661,320