Réparez vos affaires Communauté Boutique

Wacom Cintiq 24HD Back Panel Replacement

Conditions préalables uniquement
Ce tutoriel est uniquement destiné à être utilisé comme prérequis d'autres tutoriels. Il ne se suffit pas à lui-même.

Introduction

This guide shows you how to take the back panel off of the Wacom Cintiq 24HD. It is a prerequisite for other replacement guides for this device. You will need a Phillips #1 Screwdriver and a plastic opening tool.

Ce dont vous avez besoin

  1. Wacom Cintiq 24HD Back Panel Replacement, Stand: étape 1, image 1 de 1

    • Unplug any cables from the USB, power, display or DVI-D ports by gripping the cord by the connector and pulling straight out of the port.

    • Unplugging the cables by pulling on the cord or pulling at an angle can damage the cable or connector.

    Traduire

  2. Wacom Cintiq 24HD Back Panel Replacement: étape 2, image 1 de 3 Wacom Cintiq 24HD Back Panel Replacement: étape 2, image 2 de 3 Wacom Cintiq 24HD Back Panel Replacement: étape 2, image 3 de 3

    • Place the device screen down on a flat surface.

    • Remove eight 10mm Phillips #2 screws (four on each leg of the stand) by turning the screwdriver counterclockwise.

    Traduire

  4. Wacom Cintiq 24HD Back Panel Replacement: étape 3, image 1 de 1

    • Lift the stand up and away from the rest of the device so the legs separate from the mounting plate.

    Traduire

  5. Wacom Cintiq 24HD Back Panel Replacement, Back Panel: étape 4, image 1 de 3 Wacom Cintiq 24HD Back Panel Replacement, Back Panel: étape 4, image 2 de 3 Wacom Cintiq 24HD Back Panel Replacement, Back Panel: étape 4, image 3 de 3

    • Remove eighteen 10.2mm Phillips #1 screws from the perimeter of the back panel by turning the screwdriver counterclockwise.

    • Remove one 11.9mm Phillips #1 screw from the center of the back panel.

    • Remove two 10.2mm Phillips #1 screws from underneath hinged panels in the bottom right and left corners.

    • Our device does not include the cover panels for the USB, DVI-D, and power ports. You must first remove these cover panels shown in green in order to remove the back panel.

    Traduire

  6. Wacom Cintiq 24HD Back Panel Replacement: étape 5, image 1 de 2 Wacom Cintiq 24HD Back Panel Replacement: étape 5, image 2 de 2

    • Lift the back panel up by a corner and insert a plastic opening tool in the gap.

    • Slide the tool along the gap around the perimeter of the device while lifting to unlatch the back panel.

    • The latches on the back panel will make loud clicking noises when opening.

    • Remove the panel by lifting it up and off of the device.

    Traduire
Conclusion

To reassemble your device, follow these instructions in reverse order.

Auteur

avec 3 autres contributeurs

Sydney Hosokawa

Membre depuis le 10/08/18

284 Réputation

2 tutoriels rédigés

Badges: 8

+ 5 badges supplémentaires

Équipe

Cal Poly, Team S15-G3, White Fall 2018 Membre de l'équipe Cal Poly, Team S15-G3, White Fall 2018

CPSU-WHITE-F18S15G3

4 membres

18 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 0

Total : 70