Introduction
The hot plate is held in place by multiple screws along the burner ring and electrical wires. When free from the frame, take care when removing the iron plate itself as it is fairly dense.
Ce dont vous avez besoin
-
-
-
Remove the screws on the back panel with the #1 Phillips screwdriver bit.
-
The screws in the rubber legs of the burner do not need to be removed.
Demander à FixBot
-
-
-
Using a wrench, remove the bolt from the center of the back panel.
-
-
-
-
-
-
Remove screws #1 Phillips screwdriver bit.
-
3 screws on the perimeter of the circle
-
1 screw in the circle
-
2 screws on the eletrical stands with wires
-
-
-
Remove plate carefully as to not damage internal components i.e. insulator, metal frame, wires, etc.
-
-
To reassemble your device, follow these instructions in reverse order.
Annulation : je n'ai pas terminé ce tutoriel.
2 autres ont terminé cette réparation.
Équipe
USF Tampa, Team 10-7, Brown Fall 2014 Membre de l'équipe USF Tampa, Team 10-7, Brown Fall 2014
USFT-BROWN-F14S10G7
3 membres
15 tutoriels rédigés
