Aller au contenu principal

Réparez vos affaires

Droit à la réparation

Pièces & Outils

Introduction

In this guide, you will learn how to remove the outer casing of the Westcott iPoint Evolution pencil sharpener. Use this guide to replace the casing or to access the sharpener's internal components.

Pièces

Aucune pièce spécifiée.

  1. Step 1: Have the back of the pencil sharpener facing you so that you can locate the power source.
    • Step 1: Have the back of the pencil sharpener facing you so that you can locate the power source.

  2. Step 2: Grab the end of the plug and pull it out gently
    • Step 2: Grab the end of the plug and pull it out gently

  3. Step 3: There are three parts of the sharpener. Start off by grabbing the very top of the sharpener and twist it to the right and lift up to remove it Step 3: There are three parts of the sharpener. Start off by grabbing the very top of the sharpener and twist it to the right and lift up to remove it
    • Step 3: There are three parts of the sharpener. Start off by grabbing the very top of the sharpener and twist it to the right and lift up to remove it

  4. Kits pour Nintendo Switch

    Une solution rapide pour reprendre le jeu

    Acheter un kit pour Switch

    Kits pour Nintendo Switch

    Une solution rapide pour reprendre le jeu

    Acheter un kit pour Switch
  5. Step 4: Grab the center of the sharpener and lift up to remove it Step 4: Grab the center of the sharpener and lift up to remove it Step 4: Grab the center of the sharpener and lift up to remove it
    • Step 4: Grab the center of the sharpener and lift up to remove it

  6. Step 5: Remove the small ring that is around the sharpener. (Below the center of the sharpener that you just removed)' Step 5: Remove the small ring that is around the sharpener. (Below the center of the sharpener that you just removed)' Step 5: Remove the small ring that is around the sharpener. (Below the center of the sharpener that you just removed)'
    • Step 5: Remove the small ring that is around the sharpener. (Below the center of the sharpener that you just removed)'

  7. Step 6: Flip the pencil sharpener upside down. Once upside down you will see four screws located at the bottom of the pencil sharpener.
    • Step 6: Flip the pencil sharpener upside down. Once upside down you will see four screws located at the bottom of the pencil sharpener.

  8. Step 7: Take a screwdriver and begin to unscrew all of the screws on the bottom.
    • Step 7: Take a screwdriver and begin to unscrew all of the screws on the bottom.

  9. Step 8: After all the screws are removed you will be able to cleanly take off the bottom of the sharpener.
    • Step 8: After all the screws are removed you will be able to cleanly take off the bottom of the sharpener.

  10. Step 9: Carefully lift the lid off the sharpener.
    • Step 9: Carefully lift the lid off the sharpener.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Une autre personne a terminé cette réparation.

Lilly

Membre depuis le 02/06/2016

125 Réputation

1 tutoriel rédigé

Équipe

Ajouter un commentaire

Afficher les statistiques:

Dernières 24 heures : 9

7 derniers jours : 65

30 derniers jours : 222

Total : 5,441