Introduction

This guide will demonstrate how to remove and replace the feet on the Wii Balance Board.

Pièces

Aucune pièce nécessaire.

Flip device upside-down so the plastic white board is facing the ground.
  • Flip device upside-down so the plastic white board is facing the ground.

  • Locate the four feet in the corners of the Balance Board.

  • Unscrew the three 12.7 mm Philips screws from each foot cover.

Ajouter un commentaire

Remove the grey plastic ring from the actual foot by lifting it up.
  • Remove the grey plastic ring from the actual foot by lifting it up.

Ajouter un commentaire

  • Separate the loose foot from the device by lifting it up.

Ajouter un commentaire

  • Repeat steps two and three on the remaining four feet.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

Cory Olson

Membre depuis le 29/09/2014

687 Réputation

4 tutoriels rédigés

Équipe

Cal Poly, Team 13-8, Forte Fall 2014 Membre de l'équipe Cal Poly, Team 13-8, Forte Fall 2014

CPSU-FORTE-F14S13G8

5 membres

5 tutoriels rédigés

I am in need of a foot cover. Where can I find one??

Marvin Hopper - Réponse

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 3

30 derniers jours : 11

Total : 767