Aller au contenu principal

Wii Balance Board Foot Replacement

Ce dont vous avez besoin

  1. Wii Balance Board Foot Replacement, Unscrewing the Foot Cover: étape 1, image 1 de 1
    • Flip device upside-down so the plastic white board is facing the ground.

    • Locate the four feet in the corners of the Balance Board.

    • Unscrew the three 12.7 mm Phillips screws from each foot cover.

  2. Wii Balance Board Foot Replacement, Removing the Foot Cover: étape 2, image 1 de 1
    • Remove the gray plastic ring from the actual foot by lifting it up.

  3. Wii Balance Board Foot Replacement, Removing the Foot: étape 3, image 1 de 1
    • Separate the loose foot from the device by lifting it up.

  4. Wii Balance Board Foot Replacement, Removing the Additional Feet: étape 4, image 1 de 1
    • Repeat steps two and three on the remaining four feet.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Cory Olson

Membre depuis le 09/29/14

891 Réputation

4 tutoriels rédigés

Équipe

Cal Poly, Team 13-8, Forte Fall 2014 Membre de l'équipe Cal Poly, Team 13-8, Forte Fall 2014

CPSU-FORTE-F14S13G8

5 membres

15 tutoriels rédigés

2 commentaires

I am in need of a foot cover. Where can I find one??

Marvin Hopper - Réponse

This manual did not help

nbrown1959.nb - Réponse

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 1

7 derniers jours : 13

30 derniers jours : 39

Total : 2,921