Réparez vos affaires Communauté Boutique

Wolf Gourmet WGBL100S Control Board Replacement

Introduction

If your blender does not operate, try opening it as per this guide and checking the wires on the control board. If that yields no results, consider replacing the board if possible.

Ce dont vous avez besoin

  1. Wolf Gourmet WGBL100S Control Board Replacement, Control Board: étape 1, image 1 de 2 Wolf Gourmet WGBL100S Control Board Replacement, Control Board: étape 1, image 2 de 2

    • Flip the base of the blender upside-down.

    • Remove the four 1/2" long screws in the corners of the base using a Phillips #2 screwdriver.

    Traduire

  2. Wolf Gourmet WGBL100S Control Board Replacement: étape 2, image 1 de 2 Wolf Gourmet WGBL100S Control Board Replacement: étape 2, image 2 de 2

    • Using the metal spudger, pry off one half of each rubber foot.

    • Note that one side of the foot is glued down; pry off the other side.

    Traduire

  3. Wolf Gourmet WGBL100S Control Board Replacement: étape 3, image 1 de 1

    • Using the same screwdriver, remove the next four 1/2" long screws in the holes under the feet.

    • Pull the base off of the blender.

    Traduire

  5. Wolf Gourmet WGBL100S Control Board Replacement: étape 4, image 1 de 2 Wolf Gourmet WGBL100S Control Board Replacement: étape 4, image 2 de 2

    • Pull off the plastic housing.

    Traduire

  6. Wolf Gourmet WGBL100S Control Board Replacement: étape 5, image 1 de 2 Wolf Gourmet WGBL100S Control Board Replacement: étape 5, image 2 de 2

    • Using the same Phillips #2 screwdriver, remove the two 3/4" long screws holding the control board in place.

    Traduire

  7. Wolf Gourmet WGBL100S Control Board Replacement: étape 6, image 1 de 2 Wolf Gourmet WGBL100S Control Board Replacement: étape 6, image 2 de 2

    • Using pliers, pull off all the connectors on the top.

    Traduire

  8. Wolf Gourmet WGBL100S Control Board Replacement: étape 7, image 1 de 1

    • Pull or pry off the last connector block, then remove the control board.

    Traduire
Conclusion

To reassemble your device, follow these instructions in reverse order.

Auteur

avec 5 autres contributeurs

Cole Gillespie

Membre depuis le 04/19/18

476 Réputation

2 tutoriels rédigés

Badges: 9

+ 6 badges supplémentaires

Équipe

Cal Poly, Team S25-G16, Maness Spring 2018 Membre de l'équipe Cal Poly, Team S25-G16, Maness Spring 2018

CPSU-MANESS-S18S25G16

4 membres

5 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 12

30 derniers jours : 12

Total : 318