Réparez vos affaires Communauté Boutique

Wolf Gourmet WGTR102S Lighting Component Replacement

Introduction

If the buttons on your toaster don't light up, try replacing the lighting component with this guide.

Ce dont vous avez besoin

  1. Wolf Gourmet WGTR102S Lighting Component Replacement, Outer Shell: étape 1, image 1 de 1

    • Using a wedge, pry off the rubber pieces on the bottom of each foot of the toaster.

    Modifier

  2. Wolf Gourmet WGTR102S Lighting Component Replacement: étape 2, image 1 de 1

    • Remove the eight 8mm screws on each toaster foot using a Tri-point Y1 screwdriver.

    Modifier

  3. Wolf Gourmet WGTR102S Lighting Component Replacement: étape 3, image 1 de 1

    • Remove the crumb collector located on the bottom of the toaster.

    Modifier

  4. Wolf Gourmet WGTR102S Lighting Component Replacement: étape 4, image 1 de 1

    • Remove the three 8mm screws using the Tri-point Y1 screwdriver.

    Modifier

  6. Wolf Gourmet WGTR102S Lighting Component Replacement: étape 5, image 1 de 1

    • Remove the two 8mm screws on the bottom of the slide lever using a Tri-point Y1 screwdriver.

    • Once the screws are removed, detach the black plastic cover on the bottom of the slide lever.

    Modifier

  7. Wolf Gourmet WGTR102S Lighting Component Replacement: étape 6, image 1 de 1

    • Remove the final 8mm screw in the slide lever.

    • The lever can now pull away from the entire unit.

    Modifier

  8. Wolf Gourmet WGTR102S Lighting Component Replacement: étape 7, image 1 de 1

    • Remove toaster's outer shell by lifting straight up.

    • Slowly remove the outer shell. Disconnect ground wire before fully separating the shell and inner components.

    Modifier

  9. Wolf Gourmet WGTR102S Lighting Component Replacement: étape 8, image 1 de 2 Wolf Gourmet WGTR102S Lighting Component Replacement: étape 8, image 2 de 2

    • Disconnect the wire cluster that connects the lights and circuit board by pulling apart the two plastic connectors.

    • Remove the outer shell from the device.

    Modifier

  10. Wolf Gourmet WGTR102S Lighting Component Replacement, Lighting Component: étape 9, image 1 de 1

    • Remove two 8mm screws securing the lighting component using a Tri-point Y1 screwdriver.

    Modifier

  11. Wolf Gourmet WGTR102S Lighting Component Replacement: étape 10, image 1 de 1

    • Remove the lighting component from the device.

    Modifier
Conclusion

To reassemble your device, follow these instructions in reverse order.

Auteur

avec 2 autres contributeurs

Ryan Funchess

Membre depuis le 04/19/18

697 Réputation

5 tutoriels rédigés

Badges: 8

+ 5 badges supplémentaires

Équipe

Cal Poly, Team S22-G5, Maness Spring 2018 Membre de l'équipe Cal Poly, Team S22-G5, Maness Spring 2018

CPSU-MANESS-S18S22G5

4 membres

5 tutoriels rédigés

Un commentaire

Hi, do you have an idea how to remove the beeping sound? It's annoying, I want to remove it

Thank you

francis - Réponse

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 1

30 derniers jours : 1

Total : 232