Réparez vos affaires Communauté Boutique

World Dryer Airforce J4-973A3 Server Board Replacement

Introduction

If the device does not start and the Sensor Lens is in good condition, then the Circuit Board may be faulty and need replacement.

Ce dont vous avez besoin

  1. World Dryer Airforce J4-973A3 Server Board Replacement, Server Board: étape 1, image 1 de 3 World Dryer Airforce J4-973A3 Server Board Replacement, Server Board: étape 1, image 2 de 3 World Dryer Airforce J4-973A3 Server Board Replacement, Server Board: étape 1, image 3 de 3

    • Begin by removing both screws and the brushed metal casing. Simply lift up at the indicated area with your hand.

    • The INSTALL and REMOVE indicators may be incorrect, so exercise caution when removing the screws.

    Traduire

  2. World Dryer Airforce J4-973A3 Server Board Replacement: étape 2, image 1 de 2 World Dryer Airforce J4-973A3 Server Board Replacement: étape 2, image 2 de 2

    • Remove both 3/8" Ph2 screws attached to the grey belt at the top and bottom.

    • Lift the grey belt away. This gives access to the server board.

    Traduire

  4. World Dryer Airforce J4-973A3 Server Board Replacement: étape 3, image 1 de 3 World Dryer Airforce J4-973A3 Server Board Replacement: étape 3, image 2 de 3 World Dryer Airforce J4-973A3 Server Board Replacement: étape 3, image 3 de 3

    • Remove all three 1/2" Ph1 screws connecting the server board to the device.

    • During reassembly, install the screws before reattaching the wires.

    Traduire

  5. World Dryer Airforce J4-973A3 Server Board Replacement: étape 4, image 1 de 3 World Dryer Airforce J4-973A3 Server Board Replacement: étape 4, image 2 de 3 World Dryer Airforce J4-973A3 Server Board Replacement: étape 4, image 3 de 3

    • Use a plastic opening tool to remove the two pink capped wires in the upper left corner of the server board.

    • Use the same tool to dislodge the white capped ribbon bus with the multi-colored wires.

    • After these steps, the server board should easily come off the side of the device.

    Traduire
Conclusion

To reassemble your device, follow these instructions in reverse order.

Auteur

avec 3 autres contributeurs

Blane Hirsh

Membre depuis le 09/17/18

260 Réputation

2 tutoriels rédigés

Badges: 5

+ 2 badges supplémentaires

Équipe

Washington State, Team S1-G6, Hope Fall 2018 Membre de l'équipe Washington State, Team S1-G6, Hope Fall 2018

WSU-HOPE-F18S1G6

4 membres

4 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 1

7 derniers jours : 4

30 derniers jours : 6

Total : 251