Aller au contenu principal

Pièces

Aucune pièce spécifiée.

  1. Place the Smart Watch on its back or side so that the full watch band is visible. Place the Smart Watch on its back or side so that the full watch band is visible.
    • Place the Smart Watch on its back or side so that the full watch band is visible.

  2. Remove the wrist strap by gently pulling the band off of the plastic pegs on the back of the watch.
    • Remove the wrist strap by gently pulling the band off of the plastic pegs on the back of the watch.

  3. Batteries pour ordinateurs portables

    Une réparation facile pour un gain en puissance max.

    Acheter maintenant

    Batteries pour ordinateurs portables

    Une réparation facile pour un gain en puissance max.

    Acheter maintenant
  4. Remove the four screws in the back of the watch using a Phillips #0 screwdriver.
    • Remove the four screws in the back of the watch using a Phillips #0 screwdriver.

  5. Gently pull off the back side of the watch component.
    • Gently pull off the back side of the watch component.

  6. Pull the battery and motherboard component out.
    • Pull the battery and motherboard component out.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Joseph Dantes

Membre depuis le 02/10/2018

463 Réputation

4 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 4

7 derniers jours : 14

30 derniers jours : 42

Total : 357