Introduction
The WowWee MiP robot has a tendency towards short battery life. If the MiP seems too slow or stops responding, use this guide to change the MiP’s batteries. The MiP’s batteries are located in a battery pack on the robot's back.
Ce dont vous avez besoin
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Annulation : je n'ai pas terminé ce tutoriel.
3 autres ont terminé cette réparation.
11 commentaires
Its a programmer MIP not this kind.
Same question here, instructions needed for CODER MIP as it doesn't seem to be a holding a charge.
does spare battery adapter vailable(not reachargeable)
Same CODER MIP here - we got erratic performance from the battery pack. A smart slap seems required to ensure a tight battery connection after a robot fall, otherwise it appears to have run out of battery. Not optimal, but it allowed us to play for a while.
My Mip doesn’t work even if I replace the batteries. It acts very strange. It keeps making a clicking noise
Mine does to
I have A Coder MiP instead of a plain MiP
Are there different instructions.