Introduction
The LED light on the MiP indicates what mode the robot is in. If this light is malfunctioning, using the MiP is difficult.
Ce dont vous avez besoin
-
-
Use a metal spudger to carefully pry off the hubcap without marring the plastic wheel or hubcap.
-
-
-
-
Remove the eight 9.3 mm Phillips #1 screws from the back of the robot.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Annulation : je n'ai pas terminé ce tutoriel.
Une autre personne a terminé cette réparation.