Réparez vos affaires Communauté Boutique

Wyze WVCR200s Rotating Brush Replacement

Introduction

Follow this guide to replace the rotating brush from your Wyze WVCR200s robot vacuum. The rotating brush is a part of the vacuum that will need to be taken out to be cleaned regularly.

  1. Wyze WVCR200s Rotating Brush Replacement, Rotating Brush: étape 1, image 1 de 1

    • Flip the vacuum upside down so the bottom is facing up.

    • In the center of the device, you should see the rotating brush that stretches from one wheel to the other.

    Modifier

  3. Wyze WVCR200s Rotating Brush Replacement: étape 2, image 1 de 2 Wyze WVCR200s Rotating Brush Replacement: étape 2, image 2 de 2

    • Pinch the blue tabs below the rotating brush towards each other.

    • Lift the plastic housing surrounding the rotating brushing straight up, and the remove it from the vacuum.

    Modifier

  4. Wyze WVCR200s Rotating Brush Replacement: étape 3, image 1 de 3 Wyze WVCR200s Rotating Brush Replacement: étape 3, image 2 de 3 Wyze WVCR200s Rotating Brush Replacement: étape 3, image 3 de 3

    • To remove the rotating brush, lift one end of the brush upwards, and remove.

    Modifier
Conclusion

To reassemble your device, follow these instructions in reverse order.

Auteur

avec 2 autres contributeurs

Brendan

Membre depuis le 03/20/23

181 Réputation

2 tutoriels rédigés

Badges: 2

Équipe

UMass Dartmouth, Team 5-5, Ramos Spring 2023 Membre de l'équipe UMass Dartmouth, Team 5-5, Ramos Spring 2023

UMASSD-RAMOS-S23S5G5

4 membres

5 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 2

7 derniers jours : 2

30 derniers jours : 9

Total : 168