Aller au contenu principal

Introduction

Stop holding your Xbox 360 wireless controller together with duct tape. Use this guide to replace your old broken rear case.

Pièces

Aucune pièce spécifiée.

  1. Xbox 360 Wireless Controller Rear Case Replacement, Battery: étape 1, image 1 de 2 Xbox 360 Wireless Controller Rear Case Replacement, Battery: étape 1, image 2 de 2
    • Depress the battery release button on the top of the controller.

    • Remove the battery holder from the controller.

    • The standard option for Xbox 360 Wireless Controllers Battery Packs is AA batteries. A rechargeable battery is also available, but both battery options are removed from the controller in the same way.

  2. Xbox 360 Wireless Controller Rear Case Replacement, Rear Case: étape 2, image 1 de 1
    • Use a pair of tweezers to peel the barcode sticker from the battery compartment.

  3. Xbox 360 Wireless Controller Rear Case Replacement: étape 3, image 1 de 1
    • Remove the seven 9.3 mm T8 Security Torx screws securing the rear case to the front case.

    • Insert a Spudger between the front and rear cases along the left edge of the controller.

    • Rotate the spudger toward the front of the controller, prying the two cases apart.

  4. Xbox 360 Wireless Controller Rear Case Replacement: étape 5, image 1 de 2 Xbox 360 Wireless Controller Rear Case Replacement: étape 5, image 2 de 2
    • Insert a spudger between the front and rear cases, near the headphone jack.

    • Rotate the spudger toward the front of the controller to pry the two cases apart.

  5. Xbox 360 Wireless Controller Rear Case Replacement: étape 6, image 1 de 2 Xbox 360 Wireless Controller Rear Case Replacement: étape 6, image 2 de 2
    • Grasp the controller by the battery compartment and the headphone jack.

    • Lift the battery compartment away from the headphone jack, separating the rear case from the front case and logic board.

    • The battery contact springs are held in place by slots in the battery housing in the rear case. Be sure to realign them properly during reassembly.

Conclusion

To reassemble your device, follow these instructions in reverse order.

22 autres ont terminé cette réparation.

Brett Hartt

Membre depuis le 12/04/2010

124 926 Réputation

143 tutoriels rédigés

Équipe

iFixit Membre de l'équipe iFixit

Community

146 membres

16 068 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 4

7 derniers jours : 21

30 derniers jours : 120

Total : 21,671