Ce dont vous avez besoin
-
-
-
Remove the side handles by wedging a spudger in between the front and side panels.
-
To pry the side panel off move the spudger back and forth do this along the entire seam to remove the side panel.
-
-
-
-
Using a T8 security torxs screwdriver remove the five 10mm screws from the back of the controller.
-
One of the screws is hidden behind the label you can either remove the label or poke a hole through it.
-
-
-
After removing the screws the front panel should come off easily .
-
Demander à FixBot
To reassemble your device, follow these instructions in reverse order.
Annulation : je n'ai pas terminé ce tutoriel.
9 autres ont terminé cette réparation.
