Introduction

hey guys, today we will solder a new dc jack into a XI electronics tablet

to open the device , You use a isesamo opener .
  • to open the device , You use a isesamo opener .

  • Just pry the device open but be gently and cautious

  • at the second picture you see how the inside looks like.

Ajouter un commentaire

now gently remove the first connector circkled in red
  • now gently remove the first connector circkled in red

  • use a toothpick dental tool to open it. or use a small flathead screwdriver or something similar.

Ajouter un commentaire

  • remove the second connector.

  • first remove the orange tape by peeling it of.

  • then remove the black thick tape on the connecotr

Ajouter un commentaire

  • remove the third connecor , it is next to the connecotr in step 3.

Ajouter un commentaire

  • remove the screws of the main board.

Ajouter un commentaire

  • after removing the mainboard , you'll see the missing dc jack.

  • we will solder the dc jack on the main board.

  • before you do this, search the internet on how you have to solder !! and use the right tools, dont buy the cheapest tools.

Ajouter un commentaire

  • i didn't put pictures or movie on how to solder in this guide, but you will find lots of info on the internet. in the last picture you'll see the new dc jack.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

6 autre(s) ont terminé cette réparation.

Kevin D

Membre depuis le 02/05/2014

5 618 Réputation

21 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 2

30 derniers jours : 11

Total : 1,833