Introduction

Use this guide to replace the SSD in your Xiaomi Air 12.

Orient the computer so the Xiaomi logo is at the bottom of the device.
  • Orient the computer so the Xiaomi logo is at the bottom of the device.

Ajouter un commentaire

Insert the plastic opening tool underneath the top-middle rubber covering and lift upwards to reveal the hidden screw.
  • Insert the plastic opening tool underneath the top-middle rubber covering and lift upwards to reveal the hidden screw.

Ajouter un commentaire

  • Remove the eight 3 mm screws using the Torx T5 driver by inserting the screwdriver into each screw and rotating counterclockwise.

Ajouter un commentaire

  • Insert the plastic opening tool into each side of the computer and push the tool downwards to pop open the back cover.

  • You will hear popping noises as you remove the cover.

Ajouter un commentaire

  • Remove the back of the laptop by gently lifting the casing upwards.

Ajouter un commentaire

  • Detach the white and black speaker wires by pulling them from the small black tabs along the perimeter of the metal bracket.

Ajouter un commentaire

  • Remove the 1.5mm screw using the JIS #00 screwdriver.

Ajouter un commentaire

  • Lift the SSD up from the device and gently pull the SSD from the laptop.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

Hannah Kwan

Membre depuis le 18/04/2018

653 Réputation

5 tutoriels rédigés

Équipe

Cal Poly, Team S18-G4, Livingston Spring 2018 Membre de l'équipe Cal Poly, Team S18-G4, Livingston Spring 2018

CPSU-LIVINGSTON-S18S18G4

4 membres

6 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 1

7 derniers jours : 11

30 derniers jours : 56

Total : 198