Introduction
Use this guide to remove the PCB circuit board in your Xiaomi Redmi 2 for repair or replacement.
Ce dont vous avez besoin
-
-
Use the flat end of the spudger to remove the back panel from the mid-frame and front body.
-
-
-
-
Remove the 2.9 mm Phillips #000 screw that holds the PCB circuit board to the screen assembly.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Annulation : je n'ai pas terminé ce tutoriel.
14 autres ont terminé cette réparation.
3 commentaires
my phone is head phone signal
I want purches PCB Circuit not available in Akola service center