Réparez vos affaires Communauté Boutique

XtremeMac Luna Dissasembly

Introduction

This guide will show you how to open the XtremeMac Luna so that its inner components are easily accessible.

Ce dont vous avez besoin

  1. XtremeMac Luna Dissasembly, Bottom Panel: étape 1, image 1 de 3 XtremeMac Luna Dissasembly, Bottom Panel: étape 1, image 2 de 3 XtremeMac Luna Dissasembly, Bottom Panel: étape 1, image 3 de 3

    • Flip the device over so that the batteries are closest to you.

    • Remove the battery lid by pressing the battery cover's tab and pulling it away from the device.

    • Push the battery against the spring and lift it out of the casing.

    • Repeat with the other battery.

    Traduire

  3. XtremeMac Luna Dissasembly: étape 2, image 1 de 1

    • Unscrew all eight 12mm Phillips head screws with a Philips #1 screwdriver.

    • The iFixit 26 bit screwdriver kit will not reach the screws. Make sure to use a screwdriver that is thin enough to not get stuck in the screw holes.

    Traduire

  4. XtremeMac Luna Dissasembly: étape 3, image 1 de 2 XtremeMac Luna Dissasembly: étape 3, image 2 de 2

    • Flip the Luna back over so that the buttons are facing upward and the LCD screen is facing you.

    • Gently tilt the lid back 45 degrees so that the inside is exposed.

    • Be mindful of the wires inside of the Luna. It is easy to break a connection if a wire gets caught.

    Traduire
Conclusion

To reassemble your device, follow these instructions in reverse order.

Auteur

avec 5 autres contributeurs

Daniel Johnson

Membre depuis le 04/14/13

1 Réputation

1 tutoriel rédigé

Badges: 3

Équipe

Cal Poly, Team 3-47, Amido Spring 2013 Membre de l'équipe Cal Poly, Team 3-47, Amido Spring 2013

CPSU-AMIDO-S13S3G47

4 membres

8 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 1

Total : 410