Aller au contenu principal

Cette version peut contenir des modifications incorrectes. Passez au dernier aperçu vérifié.

Ce dont vous avez besoin

  1. Cette étape n’est pas traduite. Aidez à la traduire

    : étape 1, image 1 de 1
    • Turn the keyboard over so that the keys are facing the ground.

  2. Cette étape n’est pas traduite. Aidez à la traduire

    : étape 2, image 1 de 1
    • Pop the tabs on the battery casing and remove it from the back plate.

  3. Cette étape n’est pas traduite. Aidez à la traduire

    : étape 3, image 1 de 1
    • Locate the six batteries and remove them from the battery cavity.

  4. Cette étape n’est pas traduite. Aidez à la traduire

    : étape 4, image 1 de 1
    • Remove the six 10mm screws at the top of the backplate.

  5. Cette étape n’est pas traduite. Aidez à la traduire

    : étape 5, image 1 de 1
    • Remove the seven 12mm screws in the middle of the back plate.

  6. Cette étape n’est pas traduite. Aidez à la traduire

    : étape 6, image 1 de 1
    • Remove the eight 10mm screws from the side and the bottom of the back plate.

  7. Cette étape n’est pas traduite. Aidez à la traduire

    : étape 7, image 1 de 1
    • As the face plate is no longer connected to the body of the keyboard, be careful to not drop the body when performing this step.

    • Flip over the keyboard.

  8. Cette étape n’est pas traduite. Aidez à la traduire

    : étape 8, image 1 de 2 : étape 8, image 2 de 2
    • Lifting from the front and the back of the face plate equally, pull the face plate up and then back, away from the keyboard.

    • Be careful when removing the face plate. There are wires attached.

  9. Cette étape n’est pas traduite. Aidez à la traduire

    : étape 9, image 1 de 1
    • Remove the 32mm screws that hold keys down.

    • Depending on which block of keys you wish to remove, there may be four screws instead of three.

  10. Cette étape n’est pas traduite. Aidez à la traduire

    : étape 10, image 1 de 1
    • Remove the block of keys that holds the key you wish to install.

    • To do this, apply a small force away from the top of the keys and slightly toward the floor.

    • If done correctly, the block of keys will come to a slight downward angle.

  11. Cette étape n’est pas traduite. Aidez à la traduire

    : étape 11, image 1 de 2 : étape 11, image 2 de 2
    • Press the tab on the back side of the block of keys out and detach the black keys.

  12. Cette étape n’est pas traduite. Aidez à la traduire

    : étape 12, image 1 de 1
    • Remove the individual white key(s) or the black key set(s) that require replacement.

Ligne d'arrivée

7 autres ont terminé cette réparation.

Kevin Green

Membre depuis le 09/18/12

308 Réputation

2 tutoriels rédigés

Équipe

Cal Poly, Team 2-62, Propen Fall 2012 Membre de l'équipe Cal Poly, Team 2-62, Propen Fall 2012

CPSU-PROPEN-F12S2G62

2 membres

6 tutoriels rédigés

3 commentaires

Excellent, Although I've got a different type of yamaha keyboard, still good inside info.

Diederick Fokker - Réponse

Great article. Thank you so much.

Andreas Devig - Réponse

The instructions were very good and easy to understand. Question on the same subject. How about keys that have popped up on the key bed.

Donald Bryant - Réponse

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 1

30 derniers jours : 19

Total : 21,151