Réparez vos affaires Communauté Boutique

Yuneec Breeze 4K Motherboard Replacement

Introduction

Is your drone not functioning the way you want it to? Consider using this guide to replace the motherboard in your drone.

Ce dont vous avez besoin

  1. Yuneec Breeze 4K Motherboard Replacement, Motherboard M7: étape 1, image 1 de 2 Yuneec Breeze 4K Motherboard Replacement, Motherboard M7: étape 1, image 2 de 2

    • Before you begin start by putting on a ESD wrist strap to prevent ESD damage and remove the battery.

    • Flip over the drone so that the propellers are facing down and the camera is facing up.

    Traduire

  2. Yuneec Breeze 4K Motherboard Replacement: étape 2, image 1 de 3 Yuneec Breeze 4K Motherboard Replacement: étape 2, image 2 de 3 Yuneec Breeze 4K Motherboard Replacement: étape 2, image 3 de 3

    • Grip the cover that covers the rest of the wires, and give it a slight pull to remove it.

    Traduire

  3. Yuneec Breeze 4K Motherboard Replacement: étape 3, image 1 de 1

    • Remove the 4 rubber plugs that hold the drone and its internal parts together.

    • These plugs can be located in each corner of the drone, and are white.

    Traduire

  5. Yuneec Breeze 4K Motherboard Replacement: étape 4, image 1 de 1

    • Unplug the four cables that are connected on the top face of the frame.

    Traduire

  6. Yuneec Breeze 4K Motherboard Replacement: étape 5, image 1 de 2 Yuneec Breeze 4K Motherboard Replacement: étape 5, image 2 de 2

    • The rest of the wires that are still connected can be unplugged.

    • Using a pair of tweezers they can be unplugged.

    Traduire

  7. Yuneec Breeze 4K Motherboard Replacement: étape 6, image 1 de 3 Yuneec Breeze 4K Motherboard Replacement: étape 6, image 2 de 3 Yuneec Breeze 4K Motherboard Replacement: étape 6, image 3 de 3

    • Lift up or tilt entire frame and mother board and unplug all the wires.

    Traduire

  8. Yuneec Breeze 4K Motherboard Replacement: étape 7, image 1 de 3 Yuneec Breeze 4K Motherboard Replacement: étape 7, image 2 de 3 Yuneec Breeze 4K Motherboard Replacement: étape 7, image 3 de 3

    • The battery connector has two wires connected to a plug in with two little screws.

    • Unscrew the two screws and pull it apart using a small tweezers.

    Traduire

  9. Yuneec Breeze 4K Motherboard Replacement: étape 8, image 1 de 1

    • Flip over the frame and mother board and unscrew the mother board.

    • There are four screws on each corner of the mother board.

    Traduire

  10. Yuneec Breeze 4K Motherboard Replacement: étape 9, image 1 de 2 Yuneec Breeze 4K Motherboard Replacement: étape 9, image 2 de 2

    • After the screws are out, the motherboard can be pulled out softly with hands.

    • Remove the motherboard from the device.

    Traduire
Conclusion

To reassemble your device, follow these instructions in reverse order.

5 autres ont terminé cette réparation.

Auteur

avec 3 autres contributeurs

Ryanne Millis

Membre depuis le 10/04/18

318 Réputation

1 tutoriel rédigé

Badges: 8

+ 5 badges supplémentaires

Équipe

UW Stout, Team S6-G5, Ogden Fall 2018 Membre de l'équipe UW Stout, Team S6-G5, Ogden Fall 2018

UWSTOUT-OGDEN-F18S6G5

4 membres

4 tutoriels rédigés

Un commentaire

Excellent step by step instructions.

paul_courville - Réponse

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 7

Total : 1,932