Réparez vos affaires Communauté Boutique

ZTE Blade Spark Battery Replacement

Introduction

This guide goes through how to safely disassemble the ZTE Blade Spark and replace the battery. This device contains electrical components, and the repair should be preformed in a dry environment. Replacing your battery is easy and a great way to give your device a fresh start.

Ce dont vous avez besoin

  1. ZTE Blade Spark Battery Replacement, Battery: étape 1, image 1 de 1

    • Apply heat evenly on the back cover using the iOpener to soften the adhesive.

    Modifier

  2. ZTE Blade Spark Battery Replacement: étape 2, image 1 de 2 ZTE Blade Spark Battery Replacement: étape 2, image 2 de 2

    • Carefully remove the back cover using an opening tool.

    Modifier

  3. ZTE Blade Spark Battery Replacement: étape 3, image 1 de 1

    • Use a Phillips #00 screwdriver to carefully remove all fifteen 3.0 mm screws.

    • Gently remove the SIM card tray.

    Modifier

  4. ZTE Blade Spark Battery Replacement: étape 4, image 1 de 1

    • To remove the inner white panel/cover, use a plastic opening tool to loosen from each side.

    Modifier

  6. ZTE Blade Spark Battery Replacement: étape 5, image 1 de 1

    • Set the inner white panel to the side.

    Modifier

  7. ZTE Blade Spark Battery Replacement: étape 6, image 1 de 1

    • After removing the inner white panel you should see a black panel. Use a Phillips #00 screwdriver to remove the six 4.0 mm screws.

    Modifier

  8. ZTE Blade Spark Battery Replacement: étape 7, image 1 de 1

    • Remove the black panel, revealing the battery.

    Modifier

  9. ZTE Blade Spark Battery Replacement: étape 8, image 1 de 1

    • Disconnect the tab connecting the battery to the circuit.

    Modifier

  10. ZTE Blade Spark Battery Replacement: étape 9, image 1 de 1

    • Remove the battery from the device.

    Modifier

  11. ZTE Blade Spark Battery Replacement: étape 10, image 1 de 1

    • Place battery off to the side and retrieve new battery.

    Modifier
Conclusion

To reassemble your device, follow these instructions in reverse order.

Auteur

avec 1 autre contributeur

Andrew Bliss

Membre depuis le 03/27/23

181 Réputation

1 tutoriel rédigé

Badges: 2

Équipe

IUPUI, Team 1-3, Harley Spring 2023 Membre de l'équipe IUPUI, Team 1-3, Harley Spring 2023

IUPUI-HARLEY-S23S1G3

3 membres

3 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 4

Total : 119