Réparez vos affaires Communauté Boutique

ZTE Blade Spark Screen Replacement

Introduction

A step-by-step guide on how to replace the screen on a ZTE Blade Spark smartphone.

This guide is useful if the screen is cracked, has dead pixels, or is not displaying anything.

Please use caution and the necessary PPE if working with cracked screen glass.

Ce dont vous avez besoin

  1. ZTE Blade Spark Screen Replacement, Screen: étape 1, image 1 de 1

    • Place phone screen side down on a flat surface.

    Modifier

  2. ZTE Blade Spark Screen Replacement: étape 2, image 1 de 2 ZTE Blade Spark Screen Replacement: étape 2, image 2 de 2

    • Take an opening tool, and insert it between the phone's backplate and chassis.

    • Work the tool all the way around perimeter of the phone until the backplate is free.

    Modifier

  3. ZTE Blade Spark Screen Replacement: étape 3, image 1 de 1

    • Use a Phillips #00 screwdriver to carefully remove all fifteen 3.0 mm screws.

    Modifier

  4. ZTE Blade Spark Screen Replacement: étape 4, image 1 de 1

    • Remove the middle plate that was unscrewed from the previous step.

    • At this stage you should have 3 separate parts as shown.

    • For the next step you will be working on the middle part in this picture.

    Modifier

  6. ZTE Blade Spark Screen Replacement: étape 5, image 1 de 1

    • Take black covering off of battery.

    Modifier

  7. ZTE Blade Spark Screen Replacement: étape 6, image 1 de 2 ZTE Blade Spark Screen Replacement: étape 6, image 2 de 2

    • Unclip fastener located in the red box. Blunt end tweezers are recommended for this process.

    Modifier

  8. ZTE Blade Spark Screen Replacement: étape 7, image 1 de 2 ZTE Blade Spark Screen Replacement: étape 7, image 2 de 2

    • Remove battery so you are left with the base of the phone, the battery, and the battery cover separated.

    Modifier

  9. ZTE Blade Spark Screen Replacement: étape 8, image 1 de 1

    • Remove the 4mm screws in the 2 red circles shown with the Phillips #00 screwdriver.

    Modifier

  10. ZTE Blade Spark Screen Replacement: étape 9, image 1 de 1

    • Heat all 4 sides of the piece with the iOpener to loosen adhesive.

    Modifier

  11. ZTE Blade Spark Screen Replacement: étape 10, image 1 de 2 ZTE Blade Spark Screen Replacement: étape 10, image 2 de 2

    • Now remove the screen from it's base using the opening tool.

    Modifier
Conclusion

Swap your old screen with your new screen. To reassemble your device with a new screen, follow these instructions in reverse order.

Auteur

avec 1 autre contributeur

Solomon Barket

Membre depuis le 03/27/23

181 Réputation

1 tutoriel rédigé

Badges: 2

Équipe

IUPUI, Team 1-3, Harley Spring 2023 Membre de l'équipe IUPUI, Team 1-3, Harley Spring 2023

IUPUI-HARLEY-S23S1G3

3 membres

3 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 1

Total : 106