Introduction

Follow this guide to replace the volume buttons on a ZTE Lever smartphone.

  1. Remove the SD card and the Sim card from the device.
    • Remove the SD card and the Sim card from the device.

    • The Sim and SD cards are not shown here as our device did not come with them.

  2. Use an plastic opening tool to separate the back from the device. Use an plastic opening tool to separate the back from the device.
    • Use an plastic opening tool to separate the back from the device.

  3. Remove the two 1.6mm Phillips #0 screws from the battery plug cover. Remove the cover.
    • Remove the two 1.6mm Phillips #0 screws from the battery plug cover.

    • Remove the cover.

  4. %Livraison gratuite pour toute commande supérieure à 100 $US ou contenant un Pro Tech Toolkit !

    Parcourez notre boutique
  5. Disconnect the battery cable from the motherboard with a plastic opening tool. Disconnect the battery cable from the motherboard with a plastic opening tool.
    • Disconnect the battery cable from the motherboard with a plastic opening tool.

  6. Use your hands, or a plastic opening tool, to pry the battery from the phone.
    • Use your hands, or a plastic opening tool, to pry the battery from the phone.

  7. Remove the three 1.6mm Phillips #0 screws from the plastic cover on the motherboard.
    • Remove the three 1.6mm Phillips #0 screws from the plastic cover on the motherboard.

  8. Remove the top plastic motherboard cover using a plastic opening tool. Remove the top plastic motherboard cover using a plastic opening tool. Remove the top plastic motherboard cover using a plastic opening tool.
    • Remove the top plastic motherboard cover using a plastic opening tool.

  9. Use a plastic opening tool to flip up the retaining flap on the volume ribbon cable ZIF socket. Use a plastic opening tool to flip up the retaining flap on the volume ribbon cable ZIF socket.
    • Use a plastic opening tool to flip up the retaining flap on the volume ribbon cable ZIF socket.

  10. Peel up the volume button cable from the phone with hands, or plastic opening tool. Peel up the volume button cable from the phone with hands, or plastic opening tool.
    • Peel up the volume button cable from the phone with hands, or plastic opening tool.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Michael Gonzalez

Membre depuis le 29/01/2018

445 Réputation

4 tutoriels rédigés

Équipe

USF Tampa, Team S5-G2, Passmore Spring 2018 Membre de l'équipe USF Tampa, Team S5-G2, Passmore Spring 2018

USFT-PASSMORE-S18S5G2

3 membres

6 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 1

7 derniers jours : 1

30 derniers jours : 1

Total : 30