Menu 

Vos paramètres

ZTE Lever Volume Buttons Replacement

Rédigé par : Michael Gonzalez (et 2 autres contributeurs)
  • Commentaires : 0
  • Favoris : 0

Difficulté

Modérée

Étapes

9

Temps nécessaire

20 minutes

Sections

2

Drapeaux

0

Introduction

Follow this guide to replace the volume buttons on a ZTE Lever smartphone.

  1. Remove the SD card and the Sim card from the device.

    • Remove the SD card and the Sim card from the device.

    • The Sim and SD cards are not shown here as our device did not come with them.

    Modifier

  2. Use an iFixit opening tool to separate the back from the device. Use an iFixit opening tool to separate the back from the device.

    • Use an iFixit opening tool to separate the back from the device.

    Modifier

  3. Remove the two 1.6mm Phillips #0 screws from the battery plug cover. Remove the cover.

    • Remove the two 1.6mm Phillips #0 screws from the battery plug cover.

    • Remove the cover.

    Modifier

  4. Fix Kits pour Android

    Remplacer l'écran ou la batterie est à portée de kit !

    Acheter maintenant

    Fix Kits pour Android

    Remplacer l'écran ou la batterie est à portée de kit !

    Acheter maintenant

  5. Disconnect the battery cable from the motherboard with a plastic opening tool. Disconnect the battery cable from the motherboard with a plastic opening tool.

    • Disconnect the battery cable from the motherboard with a plastic opening tool.

    Modifier

  6. Use your hands, or a plastic opening tool, to pry the battery from the phone.

    • Use your hands, or a plastic opening tool, to pry the battery from the phone.

    Modifier

  7. Remove the three 1.6mm Phillips #0 screws from the plastic cover on the motherboard.

    • Remove the three 1.6mm Phillips #0 screws from the plastic cover on the motherboard.

    Modifier

  8. Remove the top plastic motherboard cover using a plastic opening tool. Remove the top plastic motherboard cover using a plastic opening tool. Remove the top plastic motherboard cover using a plastic opening tool.

    • Remove the top plastic motherboard cover using a plastic opening tool.

    Modifier

  9. Use a plastic opening tool to flip up the retaining flap on the volume ribbon cable ZIF socket. Use a plastic opening tool to flip up the retaining flap on the volume ribbon cable ZIF socket.

    • Use a plastic opening tool to flip up the retaining flap on the volume ribbon cable ZIF socket.

    Modifier

  10. Peel up the volume button cable from the phone with hands, or plastic opening tool. Peel up the volume button cable from the phone with hands, or plastic opening tool.

    • Peel up the volume button cable from the phone with hands, or plastic opening tool.

    Modifier
Conclusion

To reassemble your device, follow these instructions in reverse order.

Auteur

avec 2 autres contributeurs

Michael Gonzalez

Membre depuis le 29/01/2018

445 Réputation

4 tutoriels rédigés

Badges: 6

+ 3 badges supplémentaires

Équipe

USF Tampa, Team S5-G2, Passmore Spring 2018 Membre de l'équipe USF Tampa, Team S5-G2, Passmore Spring 2018

USFT-PASSMORE-S18S5G2

3 membres

6 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Ajouter un commentaire

Afficher les statistiques:

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 0

Total : 30