Aller au contenu principal

Introduction

The speaker has no sound. This guide will help to replace the speaker.

  1. Pry open the back case to get to the back cover. Remove eight 5mm screws with a PH0 screwdriver. Pry open  the  back cover with a plastic opening tool.
    • Pry open the back case to get to the back cover.

    • Remove eight 5mm screws with a PH0 screwdriver.

    • Pry open the back cover with a plastic opening tool.

    • Slide the plastic opening tool alongside the side seam twisting your hand forcefully to open the back cover.

    • Pry open by finding an edge and forcing it open with the plastic opening tool.

  2. Use a plastic opening tool to lift the press-fit connector up and disconnect the battery ribbon cable. Lift the battery up and remove it from the phone. Lift the battery up and remove it from the phone.
    • Use a plastic opening tool to lift the press-fit connector up and disconnect the battery ribbon cable.

    • Lift the battery up and remove it from the phone.

  3. Unplug wires with plastic opening tool  by pulling wires to the side. Unplug wires with plastic opening tool  by pulling wires to the side. Unplug wires with plastic opening tool  by pulling wires to the side.
    • Unplug wires with plastic opening tool by pulling wires to the side.

  4. Remove front speaker by using metal tweezers. Remove front speaker by using metal tweezers.
    • Remove front speaker by using metal tweezers.

Conclusion

To reassemble your device, follow these instructions in reverse order.

2 autre(s) ont terminé cette réparation.

omar

Membre depuis le 02/10/2018

717 Réputation

5 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 0

Total : 65