Aller au contenu principal

Introduction

If the camera seems cracked and/or not functioning, this is a quick guide on how to remove the existing camera.

Pièces

Aucune pièce spécifiée.

  1. Pry open back cover of the device from the crease at the bottom left corner with an opening tool or fingernail. Pry open back cover of the device from the crease at the bottom left corner with an opening tool or fingernail. Pry open back cover of the device from the crease at the bottom left corner with an opening tool or fingernail.
    • Pry open back cover of the device from the crease at the bottom left corner with an opening tool or fingernail.

  2. Remove all 16 screws with a J000 screwdriver. Remove all 16 screws with a J000 screwdriver.
    • Remove all 16 screws with a J000 screwdriver.

  3. Fix Kits pour batteries d'iPhone

    Seulement $29.99

    Buy Now

    Fix Kits pour batteries d'iPhone

    Seulement $29.99

    Buy Now
  4. Remove the battery with an opening tool or fingernail. Remove the battery with an opening tool or fingernail. Remove the battery with an opening tool or fingernail.
    • Remove the battery with an opening tool or fingernail.

  5. Gently pry open the device body by tugging from the inside out, be sure to pull up and away from device. Gently pry open the device body by tugging from the inside out, be sure to pull up and away from device. Gently pry open the device body by tugging from the inside out, be sure to pull up and away from device.
    • Gently pry open the device body by tugging from the inside out, be sure to pull up and away from device.

  6. Once body is removed, back-facing camera is placed at the top left corner of device. Using an opening tool, pull up the tab of the camera wire ribbon. Using an opening tool, pull up the tab of the camera wire ribbon.
    • Once body is removed, back-facing camera is placed at the top left corner of device.

    • Using an opening tool, pull up the tab of the camera wire ribbon.

  7. Using the blunt-nose tweezers, tug at the camera gently, switching sides to remove adhesive little by little, pull camera out gently. Using the blunt-nose tweezers, tug at the camera gently, switching sides to remove adhesive little by little, pull camera out gently. Using the blunt-nose tweezers, tug at the camera gently, switching sides to remove adhesive little by little, pull camera out gently.
    • Using the blunt-nose tweezers, tug at the camera gently, switching sides to remove adhesive little by little, pull camera out gently.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Julian Mendoza

Membre depuis le 21/09/2018

701 Réputation

5 tutoriels rédigés

Équipe

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 1

7 derniers jours : 2

30 derniers jours : 5

Total : 97