Aller au contenu principal

ZTE ZMAX Z970 Power Button Replacement

Ce dont vous avez besoin

  1. ZTE ZMAX Z970 Power Button Replacement, Battery: étape 1, image 1 de 2 ZTE ZMAX Z970 Power Button Replacement, Battery: étape 1, image 2 de 2
    • Insert a fine point tool into the hole on the top left side of the phone to remove the SIM and SD card trays.

    • Pull out the trays.

  2. ZTE ZMAX Z970 Power Button Replacement: étape 2, image 1 de 2 ZTE ZMAX Z970 Power Button Replacement: étape 2, image 2 de 2
    • Insert a plastic opening tool into the groove between the phone’s back cover and casing.

    • Move the plastic opening tool along the edges of the phone to unclip the two pieces.

  3. ZTE ZMAX Z970 Power Button Replacement: étape 3, image 1 de 3 ZTE ZMAX Z970 Power Button Replacement: étape 3, image 2 de 3 ZTE ZMAX Z970 Power Button Replacement: étape 3, image 3 de 3
    • Remove the ten 1.2mm screws with a Phillips #000 screwdriver.

  4. ZTE ZMAX Z970 Power Button Replacement: étape 4, image 1 de 2 ZTE ZMAX Z970 Power Button Replacement: étape 4, image 2 de 2
    • Remove the mid frame with the plastic opening tool.

  5. ZTE ZMAX Z970 Power Button Replacement: étape 5, image 1 de 2 ZTE ZMAX Z970 Power Button Replacement: étape 5, image 2 de 2
    • Disconnect the battery from the motherboard.

  6. ZTE ZMAX Z970 Power Button Replacement: étape 6, image 1 de 2 ZTE ZMAX Z970 Power Button Replacement: étape 6, image 2 de 2
    • Wedge a spudger underneath the battery and gently pry upwards to remove the battery.

    • Once free from the glue, remove from device.

    • The glue holding down the battery is strong so work slow and cautiously to avoid starting a fire.

  7. ZTE ZMAX Z970 Power Button Replacement, Power Button: étape 7, image 1 de 3 ZTE ZMAX Z970 Power Button Replacement, Power Button: étape 7, image 2 de 3 ZTE ZMAX Z970 Power Button Replacement, Power Button: étape 7, image 3 de 3
    • Remove the black tape covering the motherboard.

    • Remove the single 1.2mm screw with a Phillips #000 screwdriver.

  8. ZTE ZMAX Z970 Power Button Replacement: étape 8, image 1 de 3 ZTE ZMAX Z970 Power Button Replacement: étape 8, image 2 de 3 ZTE ZMAX Z970 Power Button Replacement: étape 8, image 3 de 3
    • Use the flat end of the spudger to release the upper left and right prongs that secure the motherboard.

    • Detach the antenna cable.

  9. ZTE ZMAX Z970 Power Button Replacement: étape 9, image 1 de 3 ZTE ZMAX Z970 Power Button Replacement: étape 9, image 2 de 3 ZTE ZMAX Z970 Power Button Replacement: étape 9, image 3 de 3
    • Lift up the tan flap on the three ZIF connectors.

    • Pull the ribbon out of the now unlocked ZIF connectors.

  10. ZTE ZMAX Z970 Power Button Replacement: étape 10, image 1 de 2 ZTE ZMAX Z970 Power Button Replacement: étape 10, image 2 de 2
    • Lift the covering panel below the motherboard covering and connecting the power button.

    • Disconnect the circuit tape of the power button and remove the power button.

    • The power button in these photos has been damaged and not soldered to the motherboard.

    • The new power button will have to be desoldered to the mother board.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Burak Cengiz

Membre depuis le 02/15/18

480 Réputation

4 tutoriels rédigés

Équipe

USF Tampa, Team S17-G3, Boczar Spring 2018 Membre de l'équipe USF Tampa, Team S17-G3, Boczar Spring 2018

USFT-BOCZAR-S18S17G3

3 membres

10 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 2

7 derniers jours : 2

30 derniers jours : 3

Total : 516