Réparez vos affaires Communauté Boutique

ZTE ZMAX Z970 Rear Camera Replacement

Introduction

This guide will show you how to replace the rear camera on your ZTE ZMAX Z970 smartphone.

Ce dont vous avez besoin

  1. ZTE ZMAX Z970 Rear Camera Replacement, Battery: étape 1, image 1 de 2 ZTE ZMAX Z970 Rear Camera Replacement, Battery: étape 1, image 2 de 2

    • Insert a fine point tool into the hole on the top left side of the phone to remove the SIM and SD card trays.

    • Pull out the trays.

    Modifier

  2. ZTE ZMAX Z970 Rear Camera Replacement: étape 2, image 1 de 2 ZTE ZMAX Z970 Rear Camera Replacement: étape 2, image 2 de 2

    • Insert a plastic opening tool into the groove between the phone’s back cover and casing.

    • Move the plastic opening tool along the edges of the phone to unclip the two pieces.

    Modifier

  3. ZTE ZMAX Z970 Rear Camera Replacement: étape 3, image 1 de 3 ZTE ZMAX Z970 Rear Camera Replacement: étape 3, image 2 de 3 ZTE ZMAX Z970 Rear Camera Replacement: étape 3, image 3 de 3

    • Remove the ten 1.2mm screws with a Phillips #000 screwdriver.

    Modifier

  5. ZTE ZMAX Z970 Rear Camera Replacement: étape 4, image 1 de 2 ZTE ZMAX Z970 Rear Camera Replacement: étape 4, image 2 de 2

    • Remove the mid frame with the plastic opening tool.

    Modifier

  6. ZTE ZMAX Z970 Rear Camera Replacement: étape 5, image 1 de 2 ZTE ZMAX Z970 Rear Camera Replacement: étape 5, image 2 de 2

    • Disconnect the battery from the motherboard.

    Modifier

  7. ZTE ZMAX Z970 Rear Camera Replacement: étape 6, image 1 de 2 ZTE ZMAX Z970 Rear Camera Replacement: étape 6, image 2 de 2

    • Wedge a spudger underneath the battery and gently pry upwards to remove the battery.

    • Once free from the glue, remove from device.

    • The glue holding down the battery is strong so work slow and cautiously to avoid starting a fire.

    Modifier

  8. ZTE ZMAX Z970 Rear Camera Replacement, Rear Camera: étape 7, image 1 de 2 ZTE ZMAX Z970 Rear Camera Replacement, Rear Camera: étape 7, image 2 de 2

    • Disconnect the camera from the motherboard with the flat end of a spudger.

    • Remove carefully with tweezers.

    Modifier
Conclusion

To reassemble your device, follow these instructions in reverse order.

Auteur

avec 2 autres contributeurs

Burak Cengiz

Membre depuis le 02/15/18

480 Réputation

4 tutoriels rédigés

Badges: 9

+ 6 badges supplémentaires

Équipe

USF Tampa, Team S17-G3, Boczar Spring 2018 Membre de l'équipe USF Tampa, Team S17-G3, Boczar Spring 2018

USFT-BOCZAR-S18S17G3

3 membres

10 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 1

30 derniers jours : 2

Total : 272