Réparez vos affaires Communauté Boutique

Zenbre SoundBank Z3 Speaker Grill Replacement

Introduction

This guide can be used to take out a Zenbre SoundBank Z3 speaker grill in order to replace it with a new one. The Essential Electronics toolkit, iFixit Opening Tool, and 64-Bit Driver Kit will be used.

Ce dont vous avez besoin

  1. Zenbre SoundBank Z3 Speaker Grill Replacement, Bottom Cover: étape 1, image 1 de 2 Zenbre SoundBank Z3 Speaker Grill Replacement, Bottom Cover: étape 1, image 2 de 2

    • Power off the SoundBank Z3.

    • Turn over the device.

    • Peel the silicone feet up to remove.

    • No extra adhesive is needed to reapply the feet as long as the sticky side is not touched.

    Modifier

  2. Zenbre SoundBank Z3 Speaker Grill Replacement: étape 2, image 1 de 1

    • Remove all eight of the 11 mm Phillips screws from the bottom of the device.

    Modifier

  3. Zenbre SoundBank Z3 Speaker Grill Replacement: étape 3, image 1 de 2 Zenbre SoundBank Z3 Speaker Grill Replacement: étape 3, image 2 de 2

    • Remove the bottom panel speaker using an iFixit opening tool.

    Modifier

  5. Zenbre SoundBank Z3 Speaker Grill Replacement, Motherboard Cover: étape 4, image 1 de 3 Zenbre SoundBank Z3 Speaker Grill Replacement, Motherboard Cover: étape 4, image 2 de 3 Zenbre SoundBank Z3 Speaker Grill Replacement, Motherboard Cover: étape 4, image 3 de 3

    • Remove the four 4.5 mm silver Phillips screws that secure the plastic panel covering the motherboard.

    • Remove the plastic panel.

    Modifier

  6. Zenbre SoundBank Z3 Speaker Grill Replacement, Speaker Grill: étape 5, image 1 de 3 Zenbre SoundBank Z3 Speaker Grill Replacement, Speaker Grill: étape 5, image 2 de 3 Zenbre SoundBank Z3 Speaker Grill Replacement, Speaker Grill: étape 5, image 3 de 3

    • Remove the three silver Phillips screws from the plastic ring that holds the speaker in place.

    • Be careful not to rip out the speaker while taking out the screws

    • The same steps can be done on the other side of the speaker

    Modifier

  7. Zenbre SoundBank Z3 Speaker Grill Replacement: étape 6, image 1 de 3 Zenbre SoundBank Z3 Speaker Grill Replacement: étape 6, image 2 de 3 Zenbre SoundBank Z3 Speaker Grill Replacement: étape 6, image 3 de 3

    • First, remove the speaker from the motherboard, then remove the ring that held the speaker in place.

    • These are the joints that need to be soldered. Follow this guide link to help you remove the wires from the motherboard.

    • How To Solder and Desolder Connections

    Modifier

  8. Zenbre SoundBank Z3 Speaker Grill Replacement: étape 7, image 1 de 2 Zenbre SoundBank Z3 Speaker Grill Replacement: étape 7, image 2 de 2

    • With the plastic ring removed, the speaker should slide out easily.

    • Be careful not remove other components in the speaker

    • This will expose the speaker grill

    Modifier

  9. Zenbre SoundBank Z3 Speaker Grill Replacement: étape 8, image 1 de 3 Zenbre SoundBank Z3 Speaker Grill Replacement: étape 8, image 2 de 3 Zenbre SoundBank Z3 Speaker Grill Replacement: étape 8, image 3 de 3

    • Now that the speaker has been removed, the plastic grill should be visible.

    • With a little bit of force they can be pushed out.

    Modifier
Conclusion

To reassemble your device, follow these instructions in reverse order.

2 autres ont terminé cette réparation.

Auteur

avec 7 autres contributeurs

Luc Josue Pierre Louis

Membre depuis le 03/09/16

183 Réputation

1 tutoriel rédigé

Badges: 6

+ 3 badges supplémentaires

Équipe

UMass Dartmouth, Team 3-2, Bhusal Spring 2016 Membre de l'équipe UMass Dartmouth, Team 3-2, Bhusal Spring 2016

UMASSD-BHUSAL-S16S3G2

5 membres

8 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 4

30 derniers jours : 8

Total : 521