Réparez vos affaires Communauté Boutique

Zenbre SoundBank Z3 Speaker Replacement

Introduction

This guide can be used to take out a specific device speaker in order to replace it with a new one.

Ce dont vous avez besoin

  1. Zenbre SoundBank Z3 Speaker Replacement, Bottom Cover: étape 1, image 1 de 2 Zenbre SoundBank Z3 Speaker Replacement, Bottom Cover: étape 1, image 2 de 2

    • Power off the SoundBank Z3.

    • Turn over the device.

    • Peel the silicone feet up to remove.

    • No extra adhesive is needed to reapply the feet as long as the sticky side is not touched.

    Modifier

  2. Zenbre SoundBank Z3 Speaker Replacement: étape 2, image 1 de 1

    • Remove all eight of the 11 mm Phillips screws from the bottom of the device.

    Modifier

  3. Zenbre SoundBank Z3 Speaker Replacement: étape 3, image 1 de 2 Zenbre SoundBank Z3 Speaker Replacement: étape 3, image 2 de 2

    • Remove the bottom panel speaker using an iFixit opening tool.

    Modifier

  5. Zenbre SoundBank Z3 Speaker Replacement, Motherboard Cover: étape 4, image 1 de 3 Zenbre SoundBank Z3 Speaker Replacement, Motherboard Cover: étape 4, image 2 de 3 Zenbre SoundBank Z3 Speaker Replacement, Motherboard Cover: étape 4, image 3 de 3

    • Remove the four 4.5 mm silver Phillips screws that secure the plastic panel covering the motherboard.

    • Remove the plastic panel.

    Modifier

  6. Zenbre SoundBank Z3 Speaker Replacement, Speakers: étape 5, image 1 de 2 Zenbre SoundBank Z3 Speaker Replacement, Speakers: étape 5, image 2 de 2

    • Remove the three screws that are holding the speaker down.

    • Be careful not to rip out the speaker while taking out the screws.

    Modifier

  7. Zenbre SoundBank Z3 Speaker Replacement: étape 6, image 1 de 2 Zenbre SoundBank Z3 Speaker Replacement: étape 6, image 2 de 2

    • Desolder the speaker joints from the motherboard. Follow this How To Solder guide for help with desoldering.

    Modifier

  8. Zenbre SoundBank Z3 Speaker Replacement: étape 7, image 1 de 2 Zenbre SoundBank Z3 Speaker Replacement: étape 7, image 2 de 2

    • Remove the speaker from the motherboard.

    • Remove the speaker ring.

    • Be careful not to remove other components in the speaker.

    • Repeat Steps 5-7 with the other speaker.

    Modifier
Conclusion

To reassemble your device, follow these instructions in reverse order.

Une autre personne a terminé cette réparation.

Auteur

avec 5 autres contributeurs

Cherian Thomas

Membre depuis le 03/25/16

334 Réputation

5 tutoriels rédigés

Badges: 7

+ 4 badges supplémentaires

Équipe

UMass Dartmouth, Team 3-2, Bhusal Spring 2016 Membre de l'équipe UMass Dartmouth, Team 3-2, Bhusal Spring 2016

UMASSD-BHUSAL-S16S3G2

5 membres

8 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 1

7 derniers jours : 6

30 derniers jours : 8

Total : 466