Introduction
This guide will assist the reader in replacing the tip of Zoomer Dino Boomer's tail.
Ce dont vous avez besoin
-
-
Remove the 9.4 mm Phillips #0 screw from the bottom of the tail of Zoomer Dino Boomer.
-
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Annulation : je n'ai pas terminé ce tutoriel.
Une autre personne a terminé cette réparation.
3 commentaires
Where do I buy the replacement tail? Ours broke off!
Where can I buy a new tail tip for the green dino?