Aller au contenu principal

Introduction

Zotac's bare bones machines come without hard drives or RAM. Here's how to install hard drive(s).

Pièces

Aucune pièce spécifiée.

  1. Zotac EN970 Hard Drive Replacement, Opening your machine: étape 1, image 1 de 2 Zotac EN970 Hard Drive Replacement, Opening your machine: étape 1, image 2 de 2
    • Zotac uses thumb screws to secure the case. No tools required!

    • After you remove the thumb screws, just slide the bottom cover away from you and lift it away.

  2. Zotac EN970 Hard Drive Replacement, Insert your drive: étape 2, image 1 de 3 Zotac EN970 Hard Drive Replacement, Insert your drive: étape 2, image 2 de 3 Zotac EN970 Hard Drive Replacement, Insert your drive: étape 2, image 3 de 3
    • The EN970 has three hard drive connectors: 2 2.5" bays and 1 M.2 bay.

    • There are thumb screws for the 2.5" drives that secure plastic caddies that snap onto your drive

  3. Zotac EN970 Hard Drive Replacement, M.2 Drive: étape 3, image 1 de 2 Zotac EN970 Hard Drive Replacement, M.2 Drive: étape 3, image 2 de 2
    • The M.2 drive requires a phillips screwdriver for installation. Your ZBOX should have two screws inserted in two of the three pegs.

    • Remove the screws, insert your drive and use one screw to secure it. Be sure not to over-tighten.

Conclusion

To reassemble your device, follow these instructions in reverse order.

8 autres ont terminé cette réparation.

zdowns1

Membre depuis le 21/11/2013

220 Réputation

2 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 3

30 derniers jours : 17

Total : 974