Réparez vos affaires Communauté Boutique

bObi Robotic Vacuum Power Switch Replacement

Introduction

For help closing bObi when the repair is complete, see Closing bObi's Cover Post-Repair

Ce dont vous avez besoin

  1. bObi Robotic Vacuum Power Switch Replacement, Top Cover: étape 1, image 1 de 2 bObi Robotic Vacuum Power Switch Replacement, Top Cover: étape 1, image 2 de 2

    • Remove bObi’s front wheel to access one of the screws holding bObi together.

    • Make sure the wheel is turned closer to bObi's front touch sensors. Use your screwdriver for leverage, and the wheel will pop up and out.

    • Uninstall the larger screw that sits deeper in the wheel compartment.

    Traduire

  2. bObi Robotic Vacuum Power Switch Replacement: étape 2, image 1 de 3 bObi Robotic Vacuum Power Switch Replacement: étape 2, image 2 de 3 bObi Robotic Vacuum Power Switch Replacement: étape 2, image 3 de 3

    • Remove bObi's dustbin.

    • Uninstall the 2 screws close to the bin and 2 smaller screws above her main brushes.

    Traduire

  4. bObi Robotic Vacuum Power Switch Replacement: étape 3, image 1 de 3 bObi Robotic Vacuum Power Switch Replacement: étape 3, image 2 de 3 bObi Robotic Vacuum Power Switch Replacement: étape 3, image 3 de 3

    • Lift the brush holder. To detach completely, unplug it from bObi.

    • Remove the two screws on the dustbin contact point holder inside bObi.

    • There are 4 screws beneath the main brushes. Uninstall these, and open bObi up to expose her main circuit board.

    Traduire

  5. bObi Robotic Vacuum Power Switch Replacement: étape 4, image 1 de 3 bObi Robotic Vacuum Power Switch Replacement: étape 4, image 2 de 3 bObi Robotic Vacuum Power Switch Replacement: étape 4, image 3 de 3

    • Detach the two circuit plugs connecting bObi's cover to the main board and the cover will be completely removed.

    Traduire

  6. bObi Robotic Vacuum Power Switch Replacement, Power Switch: étape 5, image 1 de 3 bObi Robotic Vacuum Power Switch Replacement, Power Switch: étape 5, image 2 de 3 bObi Robotic Vacuum Power Switch Replacement, Power Switch: étape 5, image 3 de 3

    • Slide the power switch up and out of its holder.

    • Unplug its wires from the main board.

    Traduire

  7. bObi Robotic Vacuum Power Switch Replacement: étape 6, image 1 de 3 bObi Robotic Vacuum Power Switch Replacement: étape 6, image 2 de 3 bObi Robotic Vacuum Power Switch Replacement: étape 6, image 3 de 3

    • Slide the new power switch into the holders on bObi.

    • Plug it in to the main board and begin closing bObi up. For steps on how to close bObi, see Closing bObi's Cover Post-Repair

    Traduire
Conclusion

To reassemble your device, follow the guide on closing bObi Closing bObi's Cover Post-Repair

Auteur

avec 2 autres contributeurs

Chelsea

Membre depuis le 09/24/14

2 278 Réputation

31 tutoriels rédigés

Badges: 11

+ 8 badges supplémentaires

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 2

Total : 283