To remove the lens, three T15 x 12.5mm screws must be removed by a T15 head screwdriver.
  • To remove the lens, three T15 x 12.5mm screws must be removed by a T15 head screwdriver.

  • The location of the other two screws are marked in red.

Ajouter un commentaire

After the lens has been removed the back cover needs to be removed. There are no snaps or screws holding it in place.
  • After the lens has been removed the back cover needs to be removed. There are no snaps or screws holding it in place.

Ajouter un commentaire

  • Remove battery by unplugging it from the circuit board.

Ajouter un commentaire

  • Remove the circuit board by pressing on the mounting clips (shown in red circles) using the spudger.

Ajouter un commentaire

  • Desolder the wires to free the circuit board.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

Une autre personne a terminé cette réparation.

Jeremiah Rhoades

Membre depuis le 07/11/2017

365 Réputation

3 tutoriels rédigés

Équipe

IUPUI, Team S2-G3, Harley Fall 2017 Membre de l'équipe IUPUI, Team S2-G3, Harley Fall 2017

IUPUI-HARLEY-F17S2G3

3 membres

3 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 11

30 derniers jours : 25

Total : 137