Historique Applying Low Voltage After Every Repair (Retina MacBook 2015 Only)

Modifications apportées à l’Applying Low Voltage After Every Repair (Retina MacBook 2015 Only)introduction

Modifié par Jeff Suovanen — lun. 30 avril 2018 13:43:27

Modification approuvée par Jeff Suovanen

Appareil	[ … ]Retina MacBook 2015
Type	[ … ]technique
Title	[ … ]Applying Low Voltage After Every Repair (Retina MacBook 2015 Only)
Introduction	The first-generation 12" Retina MacBook has a design quirk that requires connection to low-voltage power after a repair. '''If this step is skipped, permanent logic board damage may result.''' This procedure is not required for 2016 and later models. [ … ] Connecting the Retina MacBook to low-voltage power requires a 5W iPhone A/C adapter and a USB-A to USB-C cable, neither of which is included in the box.
Time Required Min	Aucune estimation
Time Required Max	Aucune estimation
Imageid	Avant Après
Difficulty	Moderate
Conclusion	[ … ]To reassemble your device, follow these instructions in reverse order.
Author	Jeff Suovanen
Public	Non
Summary	[ … ]After any repair, but before powering on, the 2015 12" Retina MacBook must be briefly connected to an iPhone charger to prevent damage to the logic board.