Aller au contenu principal

Modifications apportées à l’Wire Strippingintroduction

Modifié par Paul Ringelstein

Modification approuvée par Paul Ringelstein

Supprimé(e)
Ajouté(e)
Inchangé
Introduction
[ ]Wire needs to be exposed from its insulation in order for you to be able to solder parts back together. Wire stripping exposes the wire for you to be able to make necessary connections when wires break.
Time Required Min
1 minute
Time Required Max
3 minutes
Conclusion
To reassembleAfter your device, follow these instructions in reverse order. wire has been stripped, the exposed wire is ready to be soldered and reconnected to other parts of the microphone.
To reassembleAfter your device, follow these instructions in reverse order. wire has been stripped, the exposed wire is ready to be soldered and reconnected to other parts of the microphone.
Summary
[ ]This guide will help expose wire that can be be used to solder and reconnect any broken connection in the microphone.