Aller au contenu principal

Réparez vos affaires

Droit à la réparation

Boutique

Modifications apportées à l’Garmin Fenix 3 Display Assembly Replacementintroduction

Modifié par Adam Estabrook

Modification approuvée par Adam Estabrook

Avant
Après
Inchangé
Appareil
[ ]Garmin Fenix 3
Type
[ ]replacement
Thing
[ ]Watch Face
Title
[ ]Garmin Fenix 3 Watch Face Replacement
Introduction
[ ]If your watch face is damaged, cracked, or chipped, you can learn how to replace it using this guide. This guide involves unscrewing screws from the watch face, and carefully separating the ribbon connector from the motherboard.
Time Required Min
5 minutes
Time Required Max
5 minutes
Difficulty
Easy
Conclusion
[ ]To reassemble your device, follow these instructions in reverse order.
Author
Public
Non
Summary
[ ]This guide will demonstrate how to remove the watch face from the watch.

Outils

  • T6 Torx Screwdriver x1 added.
  • Spudger x1 added.

Drapeaux

  • In Progress added.
  • Student In Progress added.

Étapes

Step #: 1
Avant
Après