Aller au contenu principal

Modifications apportées à l'iBook G3 12" IO Bezel Replacement Introduction

Modifié par iRobot

Validation en attente

Supprimé(e)
Ajouté(e)
Inchangé
Introduction
How to accessReplacing the iBook G3 12" IO Bezel. plastic covering surrounding the input and output ports.
How to accessReplacing the iBook G3 12" IO Bezel. plastic covering surrounding the input and output ports.
Imageid
Avant
Après
Difficulty
Difficult
Conclusion
[ ]1

Conditions préalables au tutoriel

Outils

  • Coin x1 added.
  • Paper Clip x1 added.
  • Phillips #00 Screwdriver x1 added.
  • Push Pin x1 added.
  • Flathead 3/32" or 2.5 mm Screwdriver x1 added.
  • Spudger x1 added.
  • T8 Torx Screwdriver x1 added.

Pièces

  • iBook G3 12" I/O Bezel x1 added.

Étapes

Step #: 1
Avant
Après
Step #: 2
Avant
Après
Step #: 3
Avant
Après