Aller au contenu principal

Modifications apportées à l’Google Pixel 4 Back Panel Replacementintroduction

Modifié par Carsten Frauenheim

Modification approuvée par Carsten Frauenheim

Avant
Après
Inchangé
Title
Google Pixel 4 XL Back Panel Replacement
Introduction
This is a prerequisite-only guide! This guide is part of another procedure and is not meant to be used alone.
Use this guide to remove or replace the back glass panel on your Google Pixel 4 XL. The wireless charging coil, LED flash, and NFC hardware are all attached to this cover and will come out as one unit. If your replacement part does not have these components preinstalled, you will have to transfer parts from your original panel.
Removing the back glass panel is required to access all internal components.
Imageid
Avant
Après
Conclusion
Compare your new replacement part to the original part—you may need to transfer remaining components or remove adhesive backings from the new part before installing.
'''To reassemble your device, follow the above steps in reverse order.'''
Take your e-waste to an [[E-Waste|R2 or e-Stewards certified recycler|new_window=true]].
Repair didn’t go as planned? Try some [[Troubleshooting Problems After a Repair|basic troubleshooting]], or ask our [https://www.ifixit.com/Answers/Device/Google%20Pixel%204%20XL|Answers community] for help.
[br]
Public
Oui
Non
Summary
Prerequisite-only guide to remove or replace the glass back panel assembly in the Google Pixel 4 XL.

Conditions préalables au tutoriel

Pièces

  • Google Pixel 4 Rear Panel Adhesive x1 added.
  • Google Pixel 4 XL Rear Panel Adhesive x1 removed.