Réparez vos affaires Communauté Boutique

Historique de l'introduction : bObsweep PetHair Plus WPP56002 Cover Replacement

Modifié par Saylor Price —

Modification approuvée par Saylor Price

Avant
Après
Inchangé
Appareil
bObsweep PetHair Plus WPP56002 Repair
Type
disassembly
Title
bObsweep PetHair Plus WPP56002 Cover Disassembly
Introduction
Do you need to remove the cover of your bObsweep to replace something inside? The guide will help you remove the cover, which serves as the housing for the bObsweep. If you need to replace anything beneath, such as the bumper or touch sensor, then you must remove the cover. For this guide, you will need a flat head screwdriver (found in bObsweep’s kit) and a Phillips head screwdriver. You do not need to do any difficult steps but be careful putting your fingers near the cracks and edges when operating with the cover and its components.
Time Required Min
Aucune estimation
Time Required Max
Aucune estimation
Difficulty
Moderate
Conclusion
To reassemble your device, follow these instructions in reverse order.
Author
Saylor Price
Public
Non

Drapeaux

  • In Progress added.
  • Student In Progress added.