Aller au contenu principal

Historique de l'introduction : Board Shield Removal

Modifié par Spencer Day

Modification approuvée par Spencer Day

Avant
Après
Inchangé
Appareil
Xbox Series X (Digital Edition)
Type
replacement
Thing
Power Supply
Title
Xbox Series X (Digital Edition) Power Supply Replacement
Introduction
Use this guide to remove and replace the power supply in your Xbox Series X (Digital Edition) gaming console.
If your Xbox doesn't power on or the light on the console doesn't light up, [[Xbox Series X Turns Off By Itself#Section_Malfunctioning_Power_Supply|your power supply may be faulty|new_window=true]].
Before you begin, completely ***power down and unplug all cables*** from your console. Remember to follow general [link|https://www.ifixit.com/News/63909/what-is-esd|electrostatic discharge (ESD)] safety procedures while repairing your console.
Time Required Min
1 heure
Time Required Max
2 heures
Difficulty
Moderate
Conclusion
***To reassemble your device, follow these instructions in reverse order.***
Take your e-waste to an [[E-Waste|R2 or e-Stewards certified recycler|new_window=true]].
Repair didn’t go as planned? Try some [[Troubleshooting Problems After a Repair|basic troubleshooting]], or ask our [link|https://www.ifixit.com/Answers/Device/Xbox_Series_X_%28Digital_Edition%29|Answers community] for help.
Author
Public
Non

Conditions préalables au tutoriel

Outils

  • Angled Tweezers x1 added.
  • ESD Safe Blunt Nose Tweezers x1 added.
  • Spudger x1 added.
  • iFixit Opening Picks (Set of 6) x1 added.
  • TR8 Torx Security Screwdriver x1 added.
  • iOpener x1 added.
  • Hair Dryer x1 added.

Drapeaux

  • In Progress added.