Aller au contenu principal

Modifications apportées à l’Samsung Galaxy Light Digitizer Replacementintroduction

Modifié par Steve Godun

Modification approuvée par Steve Godun

Avant
Après
Inchangé
Thing
Screen
Digitizer
Title
Samsung Galaxy Light ScreenDigitizer Replacement
Introduction
Use this guide for replacing the screen on a Samsung Galaxy Light. TheThis guide shows how to disassemble the device toand replace the screendigitizer in a Samsung Galaxy Light (SGH-T399).
Before replacing the Samsung Galaxy Light screen, you need to remove or disconnect the following components:
* Back cover
* Battery
* Screws
* Midframe
* Motherboard
* Motherboard and screen connectors
* Headphone jack assembly, vibrator, and earpiece speaker assembly
The Galaxy Light is a low-end phone that is significantly easier to service than onther Galaxy phones. The screen and digitizer are two separate items that are not directly attached to one another; it is perfectly possible to replace the digitizer without needing to touch the screen.
Time Required Min
30 minutes
Time Required Max
30 minutes
Summary
New screen
How to replace the digitizer for a Samsung Galaxy Light (SGH-T399).

Outils

  • iFixit Opening Picks (Set of 6) x1 added.
  • Plastic Cards x1 added.
  • Metal Spudger x1 added.
  • Razor Blade x1 added.