Aller au contenu principal

Réparez vos affaires

Droit à la réparation

Boutique

Modifications apportées à l’PlayStation SCPH-5501 Motor Speed Adjustment (KSM-440ADM/AEM+)introduction

Modifié par Nick

Modification approuvée par Nick

Avant
Après
Inchangé
Introduction
In this guide, we will be looking at adjusting the trimpots on the PS1 SCPH-5501 Fat model. The reason I am doing this is to show you how to get some extra life out of a failed Fat PS1. It is quite common for the laser assembly to just stop working on these. If your unit went this long before the laser quit, consider yourself very lucky. A lot of these died earlier then this. This model has a piece of crap laser assembly. No replacement will ever bring the unit back long term, so do not replace it. Adjust itavoid replacement if you can. You are better off doing an adjustment to get some extra playmore time out of it, and then use this time to look for a SCPH-100 series(White) , 7000 Grey or 9000 Grey series model. All of these hold up a lot better then the 5000 series ever did.from it.
In this guide, we will be looking at adjusting the trimpots on the PS1 SCPH-5501 Fat model. The reason I am doing this is to show you how to get some extra life out of a failed Fat PS1. It is quite common for the laser assembly to just stop working on these. If your unit went this long before the laser quit, consider yourself very lucky. A lot of these died earlier then this. This model has a piece of crap laser assembly. No replacement will ever bring the unit back long term, so do not replace it. Adjust itavoid replacement if you can. You are better off doing an adjustment to get some extra playmore time out of it, and then use this time to look for a SCPH-100 series(White) , 7000 Grey or 9000 Grey series model. All of these hold up a lot better then the 5000 series ever did.from it.
Public
Non
Oui
Summary
Have a Grey PS1 with the notorious laser problem? You are better off fixing it by adjusting the trimpot on this unit instead of changing the laser assembly. The lasers on these suck, but you can buy time by adjusting it.
Have a Grey PS1 with the notorious laser problem? You are better off fixing it by adjusting the trimpot on this unit instead of changing the laser assembly. The lasers on these suck, but you can buy time by adjusting it.