Aller au contenu principal

Modifications apportées à l'Craftsman Circular Saw Power Cord Repair Introduction

Modifié par John

Validation en attente

Supprimé(e)
Ajouté(e)
Inchangé
Introduction
This is a common enough problem that I felt it warranted a repair guide- in addition, I wanted my trusted circular saw to get back into an operational condition. I didn't pay enough attention while working on a project and nicked the attached power cord. Needless to say, it never quite functioned the same after that- plus, the wiring would get super hot and occasionally arc! So it needed to be cut and re-spliced. [ … ] Keep in mind that this repair is working not only with a power tool, but also with a power cord that plugs into the wall. Be slow and careful with this repair to minimize the dangers involved.
This is a common enough problem that I felt it warranted a repair guide- in addition, I wanted my trusted circular saw to get back into an operational condition. I didn't pay enough attention while working on a project and nicked the attached power cord. Needless to say, it never quite functioned the same after that- plus, the wiring would get super hot and occasionally arc! So it needed to be cut and re-spliced. [ … ] Keep in mind that this repair is working not only with a power tool, but also with a power cord that plugs into the wall. Be slow and careful with this repair to minimize the dangers involved.

Outils

  • Wire Stripper x1 added.
  • Precision Utility Knife x1 added.
  • Heat Gun x1 added.
  • Heat-shrink tubing various diameters x1 added.
  • Solder x1 added.
  • Soldering Iron x1 added.