Aller au contenu principal

Modifications apportées à l'Craftsman Circular Saw Power Cord Repair Introduction

Modifié par Eric Doster

Validation en attente

Supprimé(e)
Ajouté(e)
Inchangé
Appareil
[ ]Craftsman Circular Saw
Type
[ ]repair
Thing
[ ]Power Cord
Title
[ ]Repairing Craftsman Circular Saw Power Cord
Introduction
[ ]This is a common enough problem that I felt it warranted a repair guide- in addition, I wanted my trusted circular saw to get back into an operational condition. I didn't pay enough attention while working on a project and nicked the attached power cord. Needless to say, it never quite functioned the same after that- plus, the wiring would get super hot and occasionally arc! So it needed to be cut and re-spliced.
Time Required Min
Aucune estimation
Time Required Max
Aucune estimation
Imageid
Avant
Après
Difficulty
Moderate
Conclusion
[ ]To reassemble your device, follow these instructions in reverse order.
Author
Public
Non
Summary
[ ]Repairing a damaged power cord. This power cord had been mangled by the saw blade while I was too focused on making a precise cut. Here we showcase two different methods for reconnecting the cut copper wire strands.

Drapeaux

  • In Progress added.
  • Member-Contributed Guide added.

Étapes

Step #: 1
Avant
Après
Step #: 2
Avant
Après
Step #: 3
Avant
Après
Step #: 4
Avant
Après
Step #: 5
Avant
Après
Step #: 6
Avant
Après
Step #: 7
Avant
Après
Step #: 8
Avant
Après