Aller au contenu principal

Modifications apportées à l'Repairing a Nintendo DS that is not charging Introduction

Modifié par Knut

Validation en attente

Supprimé(e)
Ajouté(e)
Inchangé
Appareil
[ ]Nintendo DS Lite
Type
[ ]repair
Thing
[ ]Logic board part EM10 filter bypass
Title
[ ]Repairing Nintendo DS Lite Logic board part EM10 filter bypass
Introduction
If you have NO charge light on the DSL and the battery don't charge, the EM10 charging filter might be broken. This can either come from rough handling or while mounting a new housing. [ … ] Removing the EM10 will possibly make the motherboard unprotected against too high or too low voltage. Preform at own risk! You might also find replacement EM10's on the internet, but this is cheaper.
Time Required Min
Aucune estimation
Time Required Max
Aucune estimation
Imageid
Avant
Après
Difficulty
Difficult
Conclusion
[ ]To reassemble your device, follow these instructions in reverse order.
Author
Public
Non
Summary
[ ]Repairs no charging light bypassing the EM10 filter.

Conditions préalables au tutoriel

Outils

  • Phillips #00 Screwdriver x1 added.
  • Solder x1 added.
  • Soldering Iron x1 added.
  • Spudger x1 added.
  • Tri-wing Screwdriver x1 added.
  • Tweezers x1 added.

Drapeaux

  • In Progress added.
  • Member-Contributed Guide added.

Étapes

Step #: 1
Avant
Après
Step #: 2
Avant
Après